HMI

ATP007kt

ATP010kt

1.7 or 10 inch touch screen

2.Real-time monitoring and display voltage,current,power,energy,power quality,switch status,waveform curve and so on.

3.monitoring device alarm,communication and other parameters can be configured on the screen.

4. 2 RS485 and 1 Ethernet interface,and data can be uploaded by RS485 or RJ45.

1. Installation:DIN rail 35mm

2. Measurement:A+B independent 3 phase circuits, 6DI2DO,2 leakage current,1 temp. and humidity.

3. With DC 24V output power supply for outgoing line module and touch screen.

4. Communication:RS485 Modbus RTU

AMC16Z-FAK24

AMC16Z-FAK48

1. Installation:DIN rail 35mm

2. Can measure up to 16 circuit 3 phase or 48 circuit single phase

3. DC24V power supply

4. Communication:RS485 modbus RTU

Current ratio:100A/50mA

Common Specification: 100A/50mA

1.Installation:DIN Rail 35mm

2.Measurement:A+B independent circuits,6DI2DO,1 temp. And humidity.

3.With DC 24V output power supply for outgoing line module and touch screen.

4.Communication:RS485 modbus RTU

AMC16Z-FDK24

AMC16Z-FDK48

1. Installation:DIN Rail 35mm

2. Can measure up to 48 circuits DC outgoing line

3. DC24V power supply

4. Communication:RS485 modbus RTU

1. Installation:DIN Rail 35mm

2. Measure A+B independent DC circuit ground insulation resistance of main bus

3. DC24V power supply

4. Communication:RS485 modbus RTU

1. Installation:DIN Rail 35mm

2. Measure 24 circuits ground insulation resistance of DC outgoing line

Current ratio:100A/5V

Common Specification: 100A/5V