SFTP CAT6 Bulk Network Cable 23AWG BC Cross Linked LSZH Jacket
Cat 6 Cable, Cat 6 Network Cable, Cat 6 Ethernet Cable, SFTP Cat 6 Cable Application
This is especially suitable for rail transit on-board PIS systems which should be given priority when it comes to the use of crossed-linked cables according to national relative standards.
TC's cross-linked, low smoke zero halogen, flame retardant stranded, shielded cable fully complies with the relevant national standards.
Product Features
TC's Cat 6, 24 AWG, 4-pair, dual shielded, cross-linked, LSZH, flame retardant, indoor cable adopts cross spline, copper mesh braid of over 80% density, as well as overall aluminum foil shield, greatly enhancing technical indicators, including Attenuation, NEXT, and ANEXT, which exceed the parameters specified in GB/T 18015.5 (IEC 61156-5) standards.
Meanwhile, the cable supports Power Over Ethernet (POE/POE+).
Application Standards
TIA/EIA568-C.2
Technical Details
| Transmission Performance | Cat.6 | TC | |||||
| Frequency (MHz) | 4 | 20 | 62.5 | 100 | 200 | 250 | 350 |
| IL Attenuation (dB/100M) | 3.4 | 9.5 | 13.5 | 17.2 | 24.8 | 28 | 31 |
| Near End Crosstalk Attenuation (NEXT, dB) | 94 | 92.4 | 90.5 | 87.9 | 78.8 | 74.9 | 62.4 |
| NEXT Power and PS NEXT (dB) | 73.9 | 69.9 | 61.7 | 64.3 | 59.6 | 61 | 58.6 |
| Equal Level Far-end Crosstalk Attenuation (ACR-F, dB) | 108.9 | 99.2 | 90.7 | 107.2 | 82.8 | 77.2 | 74.6 |
| ACR-F Power and PS ACR-F (dB) | 94.4 | 91.2 | 87.9 | 90.5 | 77 | 73.8 | 70.5 |
| Return Loss (RL, dB) | 32.8 | 38.6 | 32.8 | 38.6 | 32.5 | 27.8 | 25.3 |
Notes: The values reflected in the table above are typically measured, in accordance with IEC 61156-9.
| Physical Specifications | |
| Conductor Size (nominal value) |
4×2× (7*0.2mm) (AWG24)
|
| Outer Diameter of Cable (nominal value) |
9.0mm
|
| Weight (305m, with package, nominal value) |
22kg
|
| Electrical Properties | |
| Transverse Conversion Loss (TCL) |
≥ 55dB-20×lgf (100-2000MHz)
|
| Delay Skew | 45ns/100m |
| NVP |
65%
|
| Power Over Ethernet (POE) | Enhanced Power Over Ethernet under IEEE 802.3at |
| Mechanical Properties | |
| Minimum Bend Radius (dynamic) |
40mm
|
| Minimum Bend Radius (static) |
80mm
|
| Maximum Installation Tension |
100N
|
| Flammability (LSZH) | |
| Flame Resistance (of single wire) | GB/T 18380.12 (IEC 60332-1-2) |
|
Flame Resistance (of bunched wires)
|
GB/T 18380.35 (IEC 60332-3-24)
|
| Smoke Density | GB/T 17651 (IEC 61034-1/-2) |
| Hazardous Halogen Gas | GB/T 17650.1/.2 (IEC 60754-1/-2) |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.