Network Cable SFTP CAT5E 22AWG Bare Copper Cross Linked LSZH Jacket
Cat 5E Soft Cable, SFTP Cat 5E Cable, Cat 5E Network Cable, 22 AWG Application
Cross-linked, low-smoke zero halogen cable enjoys excellent flame resistance, along with the advantages of high overload capacity, large ampacity and insulation resistance, designed to be used in tall buildings, hotels, shopping malls, sports stadiums, transportation hubs, entertainment venues and other crowded places in which exposure to fire could only produce high flame retardant, low smoke zero halogen, non-toxic, non-corrosive gases.
This is especially suitable for rail transit on-board PIS system which should be given the first priority when it comes to the use of crossed linked cables according to national relative standards.
TC's cross-linked, low smoke zero halogen, flame retardant stranded, shielded cable is in full compliance with the relevant national standards.
Product Features
TC's Cat 5e, 22 AWG, dual shielded, cross-linked, LSZH, flame retardant, indoor, 4-pair cable invests in pair- and group-twisted technology, adopts cross spline, copper mesh braid of over 80% density, as well as overall aluminum foil shield; while 2-pair cable invests in star-quad technology, with copper mesh braid of over 85% density.
The special cross-linked, LSZH, flame retardant jacket has the advantages of high overload capacity, large ampacity and insulation resistance, long life, environmental protection and security, which ensures that when exposed to fire, it could only produce LSZH, non-toxic and non-corrosive gases.
Meanwhile, the cable supports Power Over Ethernet (POE/POE+).
Application Standards
GB/T 18233 (ISO/IEC 11801); GB 50311; TIA/EIA568-C.2
Technical Details
| Transmission Performance | Cat.5E | TC | |||||
| Frequency (MHz) | 4 | 10 | 20 | 31.25 | 62.5 | 100 | 150 |
| IL Attenuation (dB/100M) | 3.9 | 5.8 | 8.1 | 10.1 | 15.4 | 20 | 21.5 |
| Near End Crosstalk Attenuation (NEXT, dB) | 82.1 | 85 | 65 | 60 | 60 | 50 | 48 |
| NEXT Power and PS NEXT (dB) | 80.3 | 82.4 | 62.9 | 58.3 | 57.9 | 49.3 | 46 |
| Equal Level Far-end Crosstalk Attenuation (ACR-F, dB) | 81.6 | 80.9 | 75.6 | 65.6 | 63.7 | 59 | 55.8 |
| ACR-F Power and PS ACR-F (dB) | 79.8 | 78.1 | 72.6 | 66.7 | 58 | 53.6 | 50.9 |
| Return Loss (RL, dB) | 31.2 | 32.9 | 38.8 | 33.7 | 23.8 | 26.2 | 24.9 |
Notes: The values reflected in the table above are typically measured, in accordance with IEC 61156-9.
| Physical Specifications | |
| Conductor Size (nominal value) |
4×2× (19*0.16mm) (AWG22)
|
| Outer Diameter of Cable (nominal value) |
7.0mm
|
| Weight (305m, with package, nominal value) |
22kg
|
| Electrical Properties | |
| DC resistance (20℃ ) |
145Ω/km
|
| Earth Capacity | ≦ 5.6 nF/100m (@1kHz) |
| 100MHz Characteristic Impedance |
100Ω±15Ω
|
| Transverse Conversion Loss (TCL) |
≥ 55dB(30-100MHz
|
| Delay Skew | 45ns/100m |
| NVP |
65%
|
| Power Over Ethernet (POE) | Enhanced Power Over Ethernet under IEEE 802.3at |
| Mechanical Properties | |
| Minimum Bend Radius (dynamic) |
28mm
|
| Minimum Bend Radius (static) |
56mm
|
| Maximum Installation Tension |
100N
|
| Anti-Extrusion Capacity | 1000N/10cm |
| Anti-Shock Capacity | ≥ 10 times |
| Installation Temperature Range | -0℃ ~+40℃ |
| Working Temperature Range | -40℃ ~+80℃ |
| Flammability (LSZH) | |
| Flame Resistance (of single wire) | GB/T 18380.12 (IEC 60332-1-2) |
|
Flame Resistance (of bunched wires)
|
GB/T 18380.35 (IEC 60332-3-24)
|
| Smoke Density | GB/T 17651 (IEC 61034-1/-2) |
| Hazardous Halogen Gas | GB/T 17650.1/.2 (IEC 60754-1/-2) |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.