DC Inverter CO2 R417 R744 Heat Pump High COP For Cooling And Heating
Performance of DC Inverter CO2 (R417 R744) Heat Pump High Cop Cooling & Heating Heat Pumps
1. This is real CO2 heat pump water heater, with Inverter technology.
2. CO2 is next generantion refrigerant, non-flammable, non-toxic,natural
3. CO2 heat pump can work on -25ºC , and its COP is high , system no need the Aux-heater even in low temp area
4. Our system can make water outcome in 85ºC , suitable for special requirements of hot water ,EVI or any existing heat pump can not do this.
5. Our system is INVETER units, compressor and motors are INVERTER, which can save more energy
DC Inverter CO2 (R417 R744) Heat Pump High Cop Cooling & Heating Heat Pumps
The advantages of CO2 as a refrigerant
- Climate-neutral environmentally friendly refrigerant R744 (CO2)
- Without environmentally hazardous decomposition products
- No additional contribution to the greenhouse effect (GWP = 1)
- Does not contribute to the ozone depletion (ODP = 0)
- No disposal and recycling requirements
- No availability constraints
- No taxes = long-term cost-efficient
- Low security requirements - Safety Group A1
- Non-toxic, non-flammable, thermally stable, compatible with other materials
DC Inverter CO2 (R417 R744) Heat Pump High Cop Cooling & Heating Heat Pumps
| Unit type | SJKRS-28 II/C | SJKRS-36II/C | SJKRS-55 II/C | SJKRS-73 I/C | SJKRS-106 IC | SJKRS-I60II /C | |
| Specifications | 7.5HP | 10HP | 15HP | 20HP | 30HP | 40HP | |
| Power supply | Three-phase five-wire380V/50Hz | ||||||
| Heating mode | Direct heat/cycle type | ||||||
| Standard working condition | Heating capacity( kw ) | 27.5 | 36.7 | 55.1 | 72.8 | 10.6.5 | 155.1 |
| Input Power(kW) | 6.1 | 8.2 | 13.7 | 16.1 | 23.6 | 34.5 | |
| COP | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | |
| Hot Water flow(m³/h) | 0.59 | 0.79 | 1.18 | 1.56 | 2.29 | 3.33 | |
| High temperature condition | Heating capacity kw ) | 23.9 | 28.5 | 51.5 | 59.5 | 89 | 13.1.5 |
| Input Power(kW) | 7.5 | 8.9 | 16.1 | 18.6 | 27.8 | 41.1 | |
| COP | 3.2 | 3.2 | 3.2 | 3.2 | 3.2 | 3.2 | |
| Hot Water flow(m³/h) | 0.27 | 0.33 | 0.59 | 0.68 | 1.02 | 1.51 | |
| Low temperature condition | Heating capacity( kw ) | 17.3 | 21.4 | 34.8 | 41.5 | 62.2 | 94.5 |
| Input Power(kW) | 6.2 | 7.6 | 12.4 | 14.8 | 22.2 | 33.8 | |
| COP | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | |
| Hot Water flow(m³/h) | 0.32 | 0.4 | 0.65 | 0.78 | 1.16 | 1.77 | |
| Component Information | Size of water pipe joint | DN20 | DN25 | DN32 | DN40 | ||
| Water heat exchanger | Plate or sleeve heat exchanger | ||||||
| Air Heat Exchanger | Aluminum Fin for copper tube | ||||||
| compressor type | Semi-closed reciprocating | ||||||
| Operation Panel | Color touch screen | ||||||
| Maximum outlet temperature(℃) | 90℃ | ||||||
| Refrigerants | R744 (CO2 ) | ||||||
| Design pressure(MPa) | High side 15, low side 8 | ||||||
| Dimensions (length, width and height mm) | 1450x950x1450 | 1600x950x1500 | 1850x1150x1900 | 2050x1150x1950 | 2670x1410x2150 | 2290x2270x1980 | |
| Noise (dB) | 56 | 59 | 62 | 67 | 70 | 70 | |
| Weight(kg) | 550 | 660 | 780 | 860 | 1180 | 221360 | |
| SCOPE of use | Feed water temperature(℃) | 5~ 40 | |||||
| Feed water pressure | 0.05~ 0.4 | ||||||
| Effluent temperature(℃) | 55~ 90 | ||||||
| Maximum flow | 1.2 | 1.5 | 2.4 | 3.2 | 4.9 | 6.5 | |
| Ambient temperature(℃) | ’-20~43 | ||||||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.