Outdoor High Temperature R744 CO2 Heat Pump Eco friendly 70C 90C

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: 1-30 working days

Brand: LN

Product Description

High Temperature R744 CO2 Heat Pump

Superior Features and Benefits

Heats up to 90°C – Due to its innovative design, the Revere™ CO2 Heat Pump can produce hot water up to 90°C at low and high ambient temperatures (-20°C to 43°C).
Flexible – The same system can be simultaneously used for Space Heating & Domestic Hot Water.
Ultra quiet operation – 60dB(A)
No combustion – reduces fire risk
Suitable for up to 60°C ΔT (flow 90°C, return 30°C)
Ambient operating temperatures from -5°C to 43°C (Special unit available for -15°C or -20°C)
Safe – Non-flammable CO₂ refrigerant
Compact – 30% Space Saving due to Y Frame design (CHP-80)
Versatile – Suitable for a wide range of purposes, from small facilities to large buildings where hot water or heating is required.
Eco friendly – The Revere™ CO2 Heat Pump uses natural CO₂ refrigerant. This refrigerant has a global warming potential (GWP) of about 1/1700 that of R410 and zero ozone-depleting potential (ODP).
Energy efficient – Under optimal conditions, Revere™ CO2 Heat Pumps achieve an exceptional coefficient of performance (up to 4.2) which equates to higher energy efficiency. Compared to the traditional electric hot water heater, the CO2 hot water heat pump can save up to 75% heating energy. Further energy cost savings can be achieved through operation during off-peak times when a lower tariff is available.
Anti-freeze/Cold Area Units – the heat pump is fitted with a defrost solenoid valve which will open when the evaporator ices up. The hot gas will then flow through the evaporator and melts the ice.
One pass heating – It is suitable for heating water from low to high temperatures (large temperature difference) in one pass.
Reduces storage requirements – Since this hot water heat pump can heat water up to 90ºC, the size of the storage tank can be reduced.

Unit type		SJKRS-28 II/C	SJKRS-36II/C	SJKRS-55 II/C	SJKRS-73 I/C	SJKRS-106 IC	SJKRS-I60II /C
Specifications		7.5HP	10HP	15HP	20HP	30HP	40HP
Power supply		Three-phase five-wire380V/50Hz
Heating mode		Direct heat/cycle type
Standard working condition	Heating capacity( kw )	27.5	36.7	55.1	72.8	10.6.5	155.1
	Input Power(kW)	6.1	8.2	13.7	16.1	23.6	34.5
	COP	4.5	4.5	4.5	4.5	4.5	4.5
	Hot Water flow(m³/h)	0.59	0.79	1.18	1.56	2.29	3.33
High temperature condition	Heating capacity kw )	23.9	28.5	51.5	59.5	89	13.1.5
	Input Power(kW)	7.5	8.9	16.1	18.6	27.8	41.1
	COP	3.2	3.2	3.2	3.2	3.2	3.2
	Hot Water flow(m³/h)	0.27	0.33	0.59	0.68	1.02	1.51
Low temperature condition	Heating capacity( kw )	17.3	21.4	34.8	41.5	62.2	94.5
	Input Power(kW)	6.2	7.6	12.4	14.8	22.2	33.8
	COP	2.8	2.8	2.8	2.8	2.8	2.8
	Hot Water flow(m³/h)	0.32	0.4	0.65	0.78	1.16	1.77
Component Information	Size of water pipe joint	DN20		DN25		DN32	DN40
	Water heat exchanger	Plate or sleeve heat exchanger
	Air Heat Exchanger	Aluminum Fin for copper tube
	compressor type	Semi-closed reciprocating
	Operation Panel	Color touch screen
Maximum outlet temperature(℃)		90℃
Refrigerants		R744 (CO2 )
Design pressure(MPa)		High side 15, low side 8
Dimensions (length, width and height mm)		1450x950x1450	1600x950x1500	1850x1150x1900	2050x1150x1950	2670x1410x2150	2290x2270x1980
Noise (dB)		56	59	62	67	70	70
Weight(kg)		550	660	780	860	1180	221360
SCOPE of use	Feed water temperature(℃)	5~ 40
	Feed water pressure	0.05~ 0.4
	Effluent temperature(℃)	55~ 90
	Maximum flow	1.2	1.5	2.4	3.2	4.9	6.5
	Ambient temperature(℃)	’-20~43