DIN35 Rail PLC Logic Controller With 2 RJ45 100Mb Ethernet Interface
L02 New Series Ethernet Module With 2 RJ45 100Mb Ethernet Interface
The L02-EIP module communication interface supports the EtherNet/IP bus protocol, conforms to the IEC61158 standard and GB/T25105 standard, and can realize the seamless connection of the mainstream EtherNet/IP master station u Integrated dual-port switching function, convenient to achieve linear topology u Use dial switch to set the IP address, 192.168.IP1.IP0, simple and convenient u Use standard DIN35 rail installation.
|
Communication bus
|
|
|
Bus protocol
|
EtherNet/IP
|
|
Connection method
|
2*RJ45
|
|
Communication rate
|
100Mb/s
|
|
Communication distance
|
100m (distance from station to station)
|
|
Power supply parameter
|
|
|
Rated input voltage
|
DC 24V
|
|
Effective power supply range
|
DC 18-36V
|
|
Electrical isolation
|
AC 500V
|
|
Status, alarm, diagnosis
|
|
|
Power status display
|
Green RUN LED light
|
|
Network port indication
|
The green link1 LED light corresponds to
LAN1
The green link2 LED light corresponds to
LAN2
|
The communication bus protocol adopts the standard EtherNet/IP communication bus, which can easily realize barrier-free connection with EtherNet/IP PLC or industrial computer. The communication interface mode is 2 RJ45 100M Ethernet interfaces, which realize the port switching function internally, and multiple slave stations can be easily cascaded without adding a switch.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.