MI30S SPRAG Type One Way Clutch Bearing P0 Precision Rating for Optimal Functionality
Technical Datas
| Item | MI..S Series |
| Material | GCr15 |
| Bore dia. | 20-30 mm |
| Outer dia. | 80-100 mm |
| Width | 67-82 mm |
| Torque capacity | 43.1-196 N.m |
| Weight | 2.2-4.3 kg |
| Package | Carton box, wooden box or as your requirements |
Dimensions and Capacities
Num |
Torque Capacity (N·m) |
Max. Indexing (cycle/min) |
Drag Torque (N·m) |
Bore Size |
A |
C |
B |
F |
E(M6) |
G |
K |
PCD D |
S |
No.of |
Oil (ml) |
Weight (kg) |
||
| Dia. (H7) |
Key way |
Cham- fer J |
||||||||||||||||
| MI 20S | 43.1 | 300 | 0.29 | 20 | 6x2.8 | 1 | 67 | 65 | 80 | 30 | 55 | 8 | 1.0 | 68 | 13 | 6-M6xP1.0 | 45 | 1.9 |
| MI 30S | 196 | 300 | 1.08 | 30 | 10x3.3 | 1 | 82 | 80 | 100 | 45 | 75 | 5.5 | 1.0 | 88 | 16 | 6-M6xP1.25 | 100 | 4 |
Notes:
1. T max = 2 × T KN
2. Inner race overruns
3. Outer race overruns
Keyway to DIN 6885.1
Mounting
1. When mounting sprockets or gears to the outer race, use the outer race inner dimension (dimension E) to
make a centering flange on the sprocket or gear. Then attach firmly with bolts of tensile strength 10.9 or greater
to the tapped holes in the outer race. Recommended tolerance between mounted gear and centering flange is f7.
2. The recommended shaft tolerance is h6 or h7.
3. Always use a parallel key, and do not use a tapered key. A parallel key meeting ISO R773 (DIN 6885.1) is
recommended. Make sure that there is no lateral play between the key and keyways. Install an end plate on the
face of the inner race
4. When inserting the shaft, apply pressure only to the face of the inner race only.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.