RSBW60 One Way Sprag Type Freewheel Bearing Backstop Clutch

Description of RSBW60 One Way Sprag Type Freewheel Bearing Backstop Clutch

Structure: RSBW one way Bearing Backstop Clutch is a sprag type freewheel. It is self-contained, centered by plain bearings for low rotational speeds, and sealed using shield protected 0-Rings.

Application: Primarily used as backstop ,this type provides a high torque capacity with a minimum space requirement. The design allows installation in difficult environments such as high humidity or water splash areas.

Package detail: radial spherical plain bearings are delivered grease lubricated, ready to install in a vertical or horizontal position.

Catalogue of One Way Sprag type Backstop Clutch Bearing RSBW Cam Clutch

RSBW is a DC sprag type freewheel. It is self-contained, centered by plain bearings for low rotational speeds and sealed using shield protected Outer Rings.

Unit is delivered grease lubricated ready for installation in either a horizontal or vertical position.

Primarily used as a backstop, this type provides a high torque capacity with a minimum space requirement.
The design allows installation in difficult environments such as high humidity or water splash areas.

A bolt, secured to a fixed part of the machine and passing through the slot in the torque arm,

provides the rotational stop. Radial clearance on this bolt should be equal to 1-3 % of the slot width.

The torque arm and the bearings must not be prestressed.