Y Shaped Stainless Steel Floor Trim 0.6mm Tile Edge Border Finishing Strip

Y-Shaped Stainless Steel Tile Trim Tile Edge Border Finishing Strip

The stainless steel surface has NO.1, 2B, 2D, BA, 8K, frosted, HL wire drawing, etc.;

Thickness: 0.15-3.0mm,

Processing thickness: 0.2mm or more,

Width: 10-1500mm

4K surface polishing: unidirectional surface processing, not strong reflectivity. Polish with coarse abrasive, then grind with grit abrasive.

6K mirror light: It is a further improvement to 4K, it is polished with a polishing brush in abrasive and oil media.

8K Ordinary Grinding Mirror: Mirror polished surface, high reflectivity. Because the reflected image is clear, it is called 8K mirror.

8K (mirror surface) This process can be used for tape production or flat plate production. The processing cost depends on the requirements of the mirror surface and the thickness of the plate. The processing process is to grind the surface of the stainless steel plate with a grinding fluid through a polishing equipment. Make the surface brightness as clear and translucent as a mirror. The process is to use the advanced grinding equipment for high-precision grinding and polishing to meet the surface requirements.

10K fine grinding mirror surface: Continuously polish the stainless steel surface with fine abrasive, and then polish it with very fine polishing paste. Make the surface brightness as clear as a mirror.

Professional management of 304 2B thick plate, fine grinding medium and heavy plate, 8K mirror panel, wire drawing plate, stretch drawing plate, sand light plate, large plate (1500x3000～6000); various specifications of industrial 304, 321, 316L, 310S2B /NO.1 Acid-resistant board and high-temperature board.

Y-Shaped Stainless Steel Tile Trim is high quality.