Sanitary Clamp Fork Density Meter
The explosion-proof, insertable digital online tuning fork slurry density sensor offers 4 - 20mA and RS485 outputs. Using advanced overseas frequency-tracking tech, it guarantees high precision and wide applicability. Its plug-in design makes it fit for density measurement in pipelines, open or closed tanks.
Comprising two piezoelectric crystals (one for vibration generation, the other for measurement), it also has a built-in temperature sensor for vibration compensation, enhancing measurement accuracy.
Application Sanitary Clamp Fork Density Meter in Tank
The XY - 886 tuning fork density meter is widely applied in petrochemical, brewing, food, pharmaceutical, and mineral processing industries. It accurately measures the density of materials such as clay, carbonate, and silicate.
Moreover, it is vital for monitoring reactor endpoints and identifying separator interfaces, thus enhancing process precision and efficiency across these sectors.
Specification Plug in tuning fork density meter with digial display tuning fork sensor
| Measuring range |
0~3 g/cm³ optional |
| Output |
4-20 mA signal (4-wire system) |
| Accuracy |
0.3% (real-time range) or 0.001 g/cm³, whichever is greater. |
| Fluid viscosity range |
0-2000cp |
| Wetted part material |
Stainless steel, Hastelloy C22, manganese alloy 400, titanium alloy, etc. |
| Scope of application |
-30~120 degrees |
| Maximum working pressure |
20MPa |
| Protection level |
IP65 |
| Fork body material |
stainless steel 316, Hastelloy C22, manganese alloy 400 |
| Insertion depth |
125mm~2000mm (from flange to the end of the fork) |
| Process connection |
1.5"NPT threaded connections; din 50 PN40 and PN100 flange connections; |
![]()
Feature of Tuning Fork Slurry Density Sensor:
1. Inserted type, easy to install.
2. Continuous on-line measurement
3. No moving parts, maintenance-free
4. Specific conditions do anti-corrosion design
5. Temperature compensation
6. Explosion-proof certificate(Exd II CT4)
7. Do long rod type design(max can do 2m)
8. Suitable for high pressure piping(max pressure 20Mpa)
On-site installation:
