dead weight tester pressure gauge calibrator

Description dead weight tester pressure gauge calibrator

Piston dead weight tester pressure calibration is a calibration standard machine which uses a piston cylinder on which a load is placed to make an equilibrium with an applied pressure underneath the piston. Dead weight testers are so called primary standards which means that the pressure measured by a deadweight tester is defined through other quantities; Length, mass and time. Typically deadweight testers are used in calibration laboratories to calibrate pressure transfer standards like electronic pressure measuring devices.

Feature china dead weight tester pressure gauge calibration

1. The piston and cylinder are made of high strength, high stiffness, and low temperature coefficient of linear expansion of the carbide grinding tungsten carbide material , with a wide range of ambient temperature , stable performance 20 ± 5 ℃.
2. The load center of gravity low, weight by Cradle applied directly to the piston, the piston smooth operation, the pressure fluctuation is extremely small, accurate indication.
3. When pressure more than 25MPa ,the medium uses a small viscosity isooctyl sebacate, thus ensuring a very high sensitivity.
4. The weights used are all non-magnetic stainless steel material.
5.The piston displacement sensor used to monitor the working position, the piston up and down stroke of ±1.5mm, instrument display is sensitive, smart, and accurate.
6. Wide range, at the lower 1MPa, the basic error of ± 0.02% or ± 0.05%, a KY100 type manometer, capable of reaching the upper limit of the current domestic 6,60,100MPa three measuring manometer.
7. pressure regulator easy , even at 250MPa pressure could ease.

Detailed Images dead weight tester pressure gauge calibrator

Specification dead weight tester pressure gauge calibrator

Advantages dead weight tester pressure gauge calibrator