Hvac Switch Wind Pressure Sensor 0.5-4.5v Differential Pressure

Features Hvac Switch Wind Pressure Sensor 0.5-4.5v Differential Pressure

Fully intelligent circuit board, automatic compensation and linear calibration, strong isolation of interference, to ensure signal stability
It has reverse protection and current-limiting protection circuit. When the positive and negative poles are reversed during installation, the transmitter will not be damaged. When abnormal, the transmitter will automatically limit the current within 35MA.
Soft wire, polyurethane wire, anti-corrosion, high and low temperature resistance. The tail of the wire is sealed with a polymer sieve, which can ensure the air permeability of the wire and prevent water molecules from entering
The default is stable 0.25% accuracy, can be customized 0.1% accuracy and higher

Description Hvac Switch Wind Pressure Sensor 0.5-4.5v Differential Pressure

Parameter Hvac Switch Wind Pressure Sensor 0.5-4.5v Differential Pressure

Range: -10Kpa-0-10Kpa

Medium :Dry Air

Max.Static pressure: 70Kpa

Accuracy :±0.25%(Typical) ±0.5%(Max.)

Overload:20%FS

Long term stability:0.1%F.S/Y(≤2000KPa)

Temperature Drift:0.01%F.S/℃

Operating temperature range :-40℃~70℃

Storage temperature range: -40℃~70℃

Power supply:9~36VDC

Output signal :4~20mA /0-5V/0~10V//1~5V/RS485

Frequency response:less than 500Hz

Insulation resistance: 100MΩ,100VDC

Protection: IP54