Gas Piston pressure calibrator nitrogen dead weight tester with high accuracy

Description Gas Piston pressure calibrator nitrogen dead weight tester with high accuracy

Gas piston manometer is a measuring instrument that uses the principle of hydrostatic balance (that is, the fluid pressure acting on the effective area of ​​the piston is balanced with the gravity it loads) to measure pressure. In addition, the corresponding gas source should be equipped. The gas piston manometer is a high-accuracy pressure standard. It uses gas as the working medium to measure and calibrate gauge pressure, absolute pressure, vacuum pressure (negative pressure), etc. The material of the piston rod of the piston manometer is stainless steel and the material of the piston barrel is tungsten carbide. So as to ensure that the piston has the characteristics of non-rust, wear resistance and long service life. Compared with the piston manometer using gas as the working medium and the piston manometer using liquid as the working medium, due to the different working medium they use, the gas piston manometer has a long rotation duration, high sensitivity and good repeatability. The data is accurate and reliable. Piston pressure gauges have been widely recognized and applied by thousands of units in metallurgy, petroleum, chemical industry, electric power, metering, railway, engineering and other industries.
 
Features Gas Piston pressure calibrator nitrogen dead weight tester with high accuracy

1. The piston system is made of tungsten carbide, which is wear-resistant, has a small temperature drift coefficient and has a long service life.
2. Pressure range -100KPa~600KPa optional
3. Meet the JJG1086-2013 "Regulations for the Verification of Gas Piston Pressure Gauge" to distinguish the traditional oil lubricated gas piston pressure gauge.
4. The pressure interface is a quick interface, which is convenient and quick.
5. The valve adopts a unique design, which is convenient for pressure regulation.
6. Optional temperature, pressure, drop digital indicating system, convenient and quick.
7. Positive and negative pressure switching, convenient and quick.
8. Measurement range: The nominal nominal measurement range is consistent with the actual measurement range.
9. The piston system can be easily taken out for inspection (no need to carry a heavy mainframe)
10. It can be used as a calibration piston pressure gauge for transmission; it can also be used for high-precision testing. Can be equipped with kg weight and MPa weight.
11. Advanced pressurization system, light and durable!
12. The weight adopts a hanging basket structure, with a low center of gravity and excellent stability.
13. Each unit is issued with the "Verification Certificate" of the Northwest Institute of Metrology and Testing

Specification Gas Piston pressure calibrator nitrogen dead weight tester with high accuracy

Funcation Gas Piston pressure calibrator nitrogen dead weight tester with high accuracy

The gas piston manometer is a high-accuracy pressure standard. It uses gas as the working medium to measure and calibrate gauge pressure, absolute pressure, vacuum pressure (negative pressure), etc. The piston gauge system is made of tungsten carbide. So as to ensure that the piston has the characteristics of non-rust, wear resistance and long service life. Compared with the piston manometer using gas as the working medium and the piston manometer using liquid as the working medium, due to the different working medium they use, the gas piston manometer has a long rotation duration, high sensitivity and good repeatability. The data is accurate and reliable.

FKQ Type pressure calibrator meets:

Comply with JJG1086-2013 "Gas Piston Pressure Gauge"

Comply with JJG59-2006 "Weights"
Comply with JB/T-12017-2014 "Gas Piston Pressure Gauge"