17A-50-12441 17A5012441 DUST SEAL,SEAL LIP, WIPER SEAL RING
1. Quick Details of seal 17A-50-12441:
| Part NO. | 17A-50-12441 |
| Machine | D155AX-3 |
| Size | OEM |
| Material | PU |
| Oil seal type | WIPER SEAL |
2. 17A-50-12441 parts on group :
| NO. | PART NO. | PART | QTY |
| 17A-50-00011 | EQUALIZER BAR ASSEMBLLY | 1 | |
| 17A-50-00010 | EQUALIZER BAR ASSEMBLLY | 1 | |
| 1 | 17A-50-12112 | EQUALIZER BAR | 1 |
| 1 | 17A-50-12111 | EQUALIZER BAR | 1 |
| 2 | 17A-50-12270 | BUSHING | 2 |
| 3 | 17A-50-12441 | SEAL | 2 |
| 4 | 17A-50-12310 | BUSHING | 2 |
| 5 | 17A-50-12291 | SEAL | 4 |
| 6 | 04065-01204 | RING | 4 |
| 7 | 07020-00000 | FITTING,GREASE | 2 |
| 8 | 17A-50-12121 | SHAFT | 1 |
| 9 | 04082-00616 | LOCK | 2 |
| 10 | 01010-61640 | BOLT | 4 |
| 11 | 01643-31645 | WASHER | 4 |
| 12 | 17A-50-12181 | BUSHING | 4 |
| 13 | 17A-50-12391 | PIN | 2 |
| 14 | 17A-50-12211 | COVER | 2 |
| 15 | 17A-50-12411 | COVER,L.H. | 1 |
| 16 | 17A-50-12421 | COVER,R.H. | 1 |
| 17 | 01010-61630 | BOLT | 4 |
| 18 | 01643-31645 | WASHER | 4 |
| 19 | 17A-50-12331 | SPACER | 2 |
| 20 | 01010-81240 | BOLT | 10 |
| 21 | 01643-31232 | WASHER | 10 |
| 22 | 195-50-22990 | PLUG | 2 |
| 23 | 07020-00000 | FITTING,GREASE | 1 |
| 24 | 203-62-21740 | NIPPLE | 1 |
| 24 | 07213-50710 | CONNECTOR | 1 |
| 25 | 17M-03-26140 | HOSE | 1 |
| 25 | 17A-50-12321 | TUBE | 1 |
| 26 | 198-904-4280 | CLIP | 2 |
| 26 | 21T-38-11330 | CLIP | 2 |
| 27 | 01010-81220 | BOLT | 2 |
| 28 | 01643-31232 | WASHER | 2 |
| 29 | 202-62-21430 | ELBOW | 1 |
| 29 | 176-43-41350 | ELBOW | 1 |
3. 17A-13-05110 picture:
4. Service part number :
| PART NO. | PART NO. | Part NO. |
| 707-98-25060 | 707-44-15280 | 707-98-25520 |
| 707-98-25070 | 423-63-H2P06 | 707-98-25560 |
| 707-98-25090 | 707-44-16080 | 707-98-25600 |
| 707-98-25110 | 707-44-16150 | 707-98-25610 |
| 707-98-25170 | 707-44-16180 | 707-98-25620 |
| 707-98-25250 | 707-44-16190 | 707-44-18180 |
| 707-98-25350 | 707-44-16280 | 707-44-18190 |
| 707-98-25430 | 707-44-17180 | 707-44-18150 |
| 707-98-25500 | 423-63-H3P06 | 707-44-18250 |
| 707-98-25510 | 707-44-18080 | 707-44-18280 |
5. FAQ
Q: Is this pu material suitable for the dust seal ?
A: PU is Polyurethane elastomer, the most mainstream material for excavator hydraulic cylinder dust seals.It features high wear resistance, high tear strength, excellent low-temperature toughness, and good anti-aging performance. Let me talk about the core Advantages of PU Dust Seal for Komatsuu Excavators.
- Superior dust & mud scraping performancePU has high surface hardness and rigidity, which can tightly fit the piston rod surface, effectively scrape off sand, soil, gravel and sediment on the rod; prevent dirt from entering the hydraulic cylinder and damaging oil seals, bearings and guide rings.
- Excellent wear & abrasion resistanceFar better than NBR rubber and ordinary rubber materials. It adapts to harsh working conditions such as construction sites, mines and earthwork operations, with long service life.
Q:Can you tell the difference Between PU Dust Seal and NBR Rubber Dust Seal ?
A:
- PU: Higher hardness, better wear resistance, strong dust scraping ability, longer service life, suitable for heavy-duty harsh working conditions.
- NBR Rubber: Softer texture, lower cost, poorer wear resistance, easy to wear and deform in mine and construction site, only for light-duty use.
Q: What will happen if I install the dust seal in the wrong direction?
A: If the PU dust seal is installed in reverse direction:
- The dust lip cannot scrape off sand, mud and dust from the piston rod.
- Dirt will go straight into the hydraulic cylinder, scratch the rod surface.
- It will damage the main oil seal, buffer seal and guide ring quickly.
- Early oil leakage, cylinder internal leakage, causing boom drop and weak operation.
- The dust seal itself will turn over, crack and deform in a short time.
- Water and impurities enter the hydraulic system, make hydraulic oil emulsified and deteriorated.
6. Exhibition and Wearhous
Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.




