8T-1548 8T1548 High Quality Transmission Pump 3304

1. Quick Details of  seal 8T-1548:

2.  8T-1548 picture:

3. Service part number :

4. FAQ

Q: Can we reuse the old seals after disassembling the cylinder?
A: It is not recommended at all. After long-term use, the sealing parts will lose elasticity and become deformed. Reusing them will easily cause oil leakage and pressure loss, which affects the normal operation of the equipment.

Q: What problems will appear if the seals inside the kit are damaged or aging?
A: Damaged seals will lead to continuous hydraulic oil leakage. The cylinder will move slowly and lose power, and the internal pressure cannot be kept stable. In severe cases, the whole hydraulic system will break down.

Q: What preparation work should we do before installing the new seal kit?
A: You need to fully disassemble the cylinder first. Clean the inner wall and piston rod thoroughly to remove all dirt, old seal residues and oil stains. Meanwhile, check the surface for scratches and wear.

Q: Do we need to use extra sealant during the installation process?
A: There is no need to apply extra sealant. All accessories in this kit are professionally matched. Extra sealant may flow into the pipeline and cause blockage, which will bring new faults.

Q: What should we do if any seal part is scratched or torn during assembly?
A: You must stop the installation immediately. Even a tiny damage will destroy the sealing effect. Please replace the damaged part with a new one from the kit to avoid subsequent leakage troubles.

5. Exhibition and Wearhous

Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More