114-3824 1143824 Fiber Composite Gasket Kit for Construction Excavator Oil Filter Assembly Maintenance C32 C32B

1. Quick Details of  seal 114-3824:

2. 114-3824 picture:

3. Service part number :

4. FAQ

Q: What advantages does fiber composite with metal lining bring to oil filter sealing?
A: Excavators work outdoors with frequent vibration and temperature shifts. Non-asbestos fiber has stable compression recovery and will not deform after long-term bolt compression. The embedded thin metal lining avoids gasket tearing during disassembly. The outer oil-proof rubber coating blocks oil penetration, and matched NBR rings handle small auxiliary sealing holes to maintain long-term stable sealing.

Q: What color and structural features do these gaskets have?
A: The main circular flat gasket is light gray, with a central oil through hole and evenly distributed mounting holes, uniform 0.8mm thickness, and silver metal strips wrapped around the outer edge. All supporting NBR sealing rings are pure black with smooth round surfaces, and different sizes are easy to distinguish during on-site assembly.

Q: What temperature range can this gasket kit adapt to?
A: The fiber main gasket works stably from -30°C to +120°C, and NBR rubber rings adapt to -28°C to +105°C. It can cope with low-temperature winter construction and long-hour high-load summer operation without swelling or cracking.

Q: What negative impacts will low-quality gaskets bring to the engine lubrication system?
A: Cheap gaskets use loose recycled fiber without metal lining and oil-proof coating. They absorb engine oil and expand quickly, causing continuous oil seepage at the filter base. Serious oil leakage reduces engine lubrication efficiency, accelerates internal component wear, raises oil consumption, and leads to long equipment downtime.

Q: What key installation steps should operators follow to extend gasket service life?
A: First, fully clean the filter base flange to wipe off old gasket residues and oil dirt. Second, lay the gasket flat without tilting or folding, the coated side faces the oil passage. Third, tighten fixing bolts crosswise in two batches to prevent partial extrusion damage. Do not apply thick liquid sealant to avoid blocking oil circulation passages.

5. Exhibition and Wearhous

Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More