455011 RING,SNAP OF MX15 MX09
1. Quick Details of seal 455011:
| Part NO. | 455011 |
| Machine | Road Roller |
| Size | OEM |
| Material | NBR nitrile rubber lip |
| Oil seal type | SEAL LIP |
2. 455011 parts on group :
| NO. | PART NO. | PRAT NAME | QTY |
| 1 | 450-252 | BODY ASSEMBLY (K-3) | 1 |
| 2 | BODY SUB ASSEMBLY (K-4) | 1 | |
| 3 | 456-267 | SHAFT | 1 |
| 4 | CYLINDER (K-5) | 1 | |
| 5 | PLATE,VALVE (K-5) | 1 | |
| 6 | PISTON (K-5) | 7 | |
| 7 | SHOE (K-5) | 7 | |
| 8 | HOLDER,SHOE (K-5) | 1 | |
| 9 | HOLDER (K-5) | 1 | |
| 10 | 454-729 | PLATE,SWASH | 1 |
| 11 | PISTON,CONTROL (K-4) | 1 | |
| 12 | PIN (K-5) | 3 | |
| 13 | SPRING (K-5) | 1 | |
| 14 | 450-926 | RETAINER (K-5) | 2 |
| 15 | 450-166 | BEARING | 1 |
| 16 | 450-167 | BEARING (K-3) | 1 |
| 17 | 453-618 | O-RING (K-6) | 1 |
| 18 | 453-630 | O-RING (K-6) | 1 |
| 19 | SEAL,OIL (K-4)(K-6) | 1 | |
| 20 | 450-092 | BALL | 2 |
| 21 | 455-011 | RING,SNAP (K-5) | 1 |
| 22 | 455-576 | SCREW | 7 |
| 23 | 454-250 | PIN,SPRING (K-3) | 1 |
| 24 | 454-247 | PIN | 1 |
| 25 | 455-564 | PLUG (K-4) | 1 |
3. 455011 picture:
4. Service part number :
| PART NO. | PART NO. | Part NO. |
| 254287 | 417344 | 480028 |
| 470380 | 90036 | 473016 |
| 370087 | 8660S | 370021 |
| 417350 | 254270 | 254287 |
| 455079 | 370018A | 415988 |
| 410625 | 471224 | 473214 |
5. FAQ
Q: Can this oil seal work steadily on rotating shaft assemblies?
A: Yes, the specially designed sealing lip fits rotary shafts to block internal lubricant leakage.
Q: Where is this seal kit installed on the machine?
A: It fits for gearbox rotating shaft assemblies of road roller compaction machinery.
Q: Does this repair kit contain all matching sealing accessories for one‑time overhaul?
A: Yes, auxiliary gaskets and supporting small sealing parts are fully prepared for complete gearbox shaft servicing.
Q: How is the compatibility with common mechanical lubricants?
A: NBR material delivers good oil resistance, with low swelling performance for gear oil and bearing grease widely used in compaction equipment.
Q: Does this repair kit contain all matched sealing accessories for one overhaul?
A: Yes, corresponding backup rings and assorted small auxiliary gaskets are included for complete axle‑differential system maintenance.
Q: How will this sealing kit interact with construction‑site lubricants?
A: Nitrile rubber keeps stable dimensional property and low‑swelling rate against transmission gear oil and conveyor bearing grease.
Q: What abnormal conditions indicate oil seals should be replaced?
A: Lubricant leaks out from conveyor drive shaft end, conveyor runs unevenly, periodic scraping noise occurs and drive housing produces obvious over‑heat during paving work.
Q: What risk will scratch damage bring to electrophoretic coated shell?
A: Once the coating layer is scratched off, bare steel will corrode gradually, which may lead to seal loosening and unexpected oil leakage.
Q: How well can this full sealing kit block mud, gravel dust and hot gear oil mist on muddy outdoor road job sites?
A: The multi-layer flexible rubber lip scrapes thick mud off the shaft surface, the fully enclosed plated metal shell blocks coarse dust particles, and inner auxiliary rubber layers isolate high-temperature oil mist to protect internal precision gears.
6. Exhibition and Wearhous
Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.