417351 SHAFT New.Holland parts of 1500, 1400
1. Quick Details of seal 417351:
| Part NO. | 417351 |
| Machine | Wheel‑type loader |
| Size | OEM |
| Material | Nitrile‑butadiene rubber |
| Oil seal type | SEAL LIP |
2. 417351 parts on group :
| NO. | PART NO. | PRAT NAME | QTY |
| 1 | 80362464 | RING | 2 |
| 2 | 80210025 | RING | 6 |
| 3 | 520243 | STUD | 4 |
| 4 | 580000 | NUT | 4 |
| 5 | 482284 | STUD | 1 |
| 6 | 321315 | BLOCK | 1 |
| 7 | 580076 | LOCK NUT | 4 |
| 8 | 332255 | WHEEL DISC | 1 |
| 9 | 397064 | WHEEL DISC | 1 |
| 10 | 9618024 | WHEEL | 1 |
| 11 | 110680 | BALL,12.75mm OD | 2 |
| 12 | 180012 | SPRING | 2 |
| 13 | 390835 | SPRING | 2 |
| 14 | 520288 | SCREW | 2 |
| 15 | 371035 | CLEVIS | 2 |
| 16 | 364956 | SHAFT | 1 |
| 17 | 417351 | SHAFT | 1 |
| 18 | 364957 | SHAFT | 1 |
| 19 | 370001 | SNAP RING,M22, External | 2 |
| 20 | 323221 | RING | 2 |
| 21 | 310022 | PLUG | 2 |
| 22 | 321992 | COVER | 1 |
| 23 | 322067 | GASKET | 4 |
| 24 | 80420463 | GASKET,0.25mm Thk | 4 |
| 25 | 80300633 | SNAP RING,M80, Int | 1 |
| 26 | 80321942 | RING | 1 |
| 27 | 80321952 | RING | 1 |
| 28 | 370006 | SNAP RING,M40, Ext | 1 |
| 29 | 210036 | BALL BEARING | 1 |
| 30 | 321312 | FLANGED BEARING | 1 |
| 31 | 80374436 | CONTROLSHAFT | 1 |
| 32 | 324041 | BEARING ASSEMBLY | 1 |
| 33 | NSS | NOT SOLD SEPARAT | 1 |
| 34 | 370002 | CIRCLIPM25, External | 1 |
| 35 | NSS | NOT SOLD SEPARAT | 1 |
| 36 | 330258 | GEAR | 1 |
| 37 | 80330246 | GEAR | 1 |
| 38 | 80417205 | GEAR | 1 |
| 39 | 321716 | BOLT,Hex, M12 x 38mm, CI 8.8, Full Thd | 2 |
| 40 | 337475 | NUT,M12, CI 10 | 2 |
| 41 | 80330261 | GEAR | 1 |
| 42 | 80418109 | GEAR | 1 |
| 43 | 210009 | NEEDLE BEARING,25 mm ID x 32 mm OD x 38 mm | 2 |
| 44 | 418080 | NEEDLE BEARING | 2 |
| 45 | 80330248 | SHAFT | 1 |
| 46 | 80418001 | SHAFT | 1 |
| 47 | 520450 | WASHER | 1 |
| 48 | 280278 | LOCK WASHER,Ext Tooth, 5/16" | 1 |
| 49 | 580049 | SCREW | 1 |
| 50 | 520349 | WASHER | 1 |
| 51 | 332966 | WASHER | 1 |
| 52 | 327966 | RING | 1 |
| 53 | 330257 | GEAR | 1 |
| 54 | 210035 | BALL BEARING,25 mm ID x 52 mm OD x 20.6 mm | 1 |
| 55 | 370011 | CIRCLIPM52 x 2mm Thk, Internal | 1 |
| 56 | 330249 | SHAFT | 1 |
| 57 | 580033 | SCREW | 1 |
| 58 | 210014 | WASHER | 4 |
| 59 | 410006 | GEAR | 4 |
| 60 | 410007 | SHAFT | 2 |
| 61 | 410034 | PINION | 2 |
| 62 | 210013 | THRUST WASHER,70.1mm ID x 104mm OD x 4mmThk | 2 |
| 63 | 327259 | HOUSING | 1 |
| 64 | 331649 | LOCKING PLATE | 4 |
| 65 | 580139 | SCREW | 8 |
| 66 | 330254 | SHAFT | 2 |
| 67 | 330252 | DIFFERENTIAL | 1 |
| 68 | 210046 | BALL BEARING,90mm ID x 160mm OD x 30mm W | 2 |
| 69 | 335076 | SUPPORT | 1 |
| 70 | 335077 | SUPPORT | 1 |
| 71 | 333822 | SUPPORT | 1 |
| 72 | 335088 | REINFORCEMENT | 1 |
| 73 | 354149 | SUPPORT | 1 |
| 74 | 326085 | LOCK NUT | 2 |
| 75 | 326084 | WASHER | 2 |
| 76 | 353159 | GEAR | 2 |
| 77 | 370014 | SNAP RING,M130, Internal | 2 |
| 78 | 330225 | BEARING, ROLLER, CYL,65 mm ID x 120 mm OD x31 mm | 2 |
| 79 | 330223 | RING | 2 |
| 80 | 80220017 | SEAL | 2 |
| 81 | 353158 | WASHER, THRUST | 2 |
| 82 | 220041 | WASHER | 4 |
| 83 | 420392 | GASKET | 4 |
| 84 | 334572 | HOUSING | 1 |
| 85 | 375972 | HOUSING | 1 |
| 86 | 330496 | SHAFT | 2 |
| 87 | 131537 | Tube, Inner, For 18.4 x 26 Tire | 1 |
| 88 | 190008 | TIRE TUBE | 1 |
| 89 | 241024 | Tube, Inner, For 24.5 x 32 Tire, Used on MachinesEquipped W/Flotation Package 202195 | 1 |
| 90 | 335081 | SUPPORT | 1 |
| 91 | 335078 | SUPPORT | 1 |
| 92 | 335080 | SPACER | 1 |
| 93 | 335079 | SPACER | 1 |
| 94 | 580124 | PAD | 5 |
| 95 | 580069 | SCREW | 1 |
| 96 | 333040 | WASHER,16.5mm ID x 49mm OD x 6mm Thk | 19 |
| 97 | 333041 | WASHER,16.5mm ID x 49mm OD x 6mm Thk | 15 |
| 98 | 580004 | NUT | 1 |
| 99 | 354229 | SNAP RING | 2 |
| 100 | 87415 | LUBE NIPPLE,90 Degree, 1/4" NPT x 3/4" L, Drive | 4 |
| 101 | 236019 | BRACKET | 1 |
| 102 | 88556 | BOLT,Hex, 5/8° - 11 x 2 1/4", Gr 5 | 1 |
| 103 | 130358 | WASHER,16.28mm ID x 38.35mm OD x 4.11mm Thk | 4 |
| 104 | 86729275 | LOCK WASHER,5/8 0.634 CST ZND | 4 |
| 105 | 84957 | Nut, Hex, 5/8" | 4 |
| 106 | 236018 | BRACKET | 1 |
| 107 | 87017 | JAM NUT,Jam, 7/16"-14, G2 | 4 |
| 108 | 80220018 | RING,140mm ID x 180mm OD x 15mm Thk | 2 |
| 109 | 354230 | COLLAR | 2 |
| 110 | 210047 | BALL BEARING,100 mm ID x 180 mm OD x 34 mm | 2 |
| 111 | 330291 | WHEEL BOLT | 16 |
| 112 | 336902 | HUB | 2 |
| 113 | 87414 | LUBE NIPPLE,1/4* - 28 | 2 |
| 114 | 350204 | BALL BEARING,100 mm ID x 180 mm OD x 34 mm | 2 |
| 115 | 520304 | WASHER | 2 |
| 116 | 370010 | SNAP RING,M100, External | 2 |
| 117 | 336901 | HUB | 2 |
| 118 | 335137 | LOCK WASHER | 16 |
| 119 | 310020 | COVER | 2 |
| 120 | 336945 | WHEEL NUT,M22 x 1.5, CI 10 | 16 |
| 121 | 336900 | STUD | 4 |
| 122 | 332263 | Tire, 23.1 x 26, 10 Ply, Code R-1 Std. Cleat | 1 |
| 123 | 332268 | Tire, 18.4 x 26, 10 Ply, Code R-3 Diamond Tread | 1 |
| 124 | 332170 | TYRE/TIRE | 1 |
| 125 | 362828 | TYRE/TIRE | 1 |
| 126 | 332276 | TIRE TUBE | 1 |
| 127 | 350351 | Tire, 23.1 x 26, 8 Ply, Code R-3, Diamon Tread | 1 |
| 128 | 241025 | Tire, 24.5 x 32, 10 Ply, Code R-2 Deep Tread Open,Used on Machines Equipped W/Flotation Package202195 | 1 |
| 129 | 384549 | COVER | 2 |
| 130 | 80384878 | PLUG | 2 |
| 131 | 86505999 | BOLT,Hex, 5/8' - 11 x 2", Gr 5 | 3 |
3. 417351 picture:
4. Service part number :
| PART NO. | PART NO. | Part NO. |
| 254287 | 417344 | 480028 |
| 470380 | 90036 | 473016 |
| 370087 | 8660S | 370021 |
| 471647 | 254270 | 254287 |
| 476281 | 370018A | 415988 |
| 410625 | 471224 | 473214 |
5. FAQ
Q: Can this oil seal work steadily on rotating shaft assemblies?
A: Yes, the specially designed sealing lip fits rotary shafts to block internal lubricant leakage.
Q: How will this sealing kit perform when contacting common site lubricants?
A: Nitrile rubber maintains stable dimension and low‑swelling rate against axle gear oil and wheel‑hub bearing grease.
Q: Should installers polish housing bore before fitting this seal kit?
A: Only ensure mounting cavity stays clean and burr‑free, no extra cutting or modification required for installation.
Q: What special surface treatment is applied to the steel shell?
A: The steel shell applies redicoat protective coating to boost scratch resistance in harsh construction‑site environment.
Q: What early failure symptoms should mechanics pay attention to during routine inspection?
A: Watch for grease oozing from wheel‑hub end and intermittent abnormal humming noise while the machine is travelling.
Q: Does this overhaul kit contain complete supporting sealing accessories?
A: Yes, matched backup rings and assorted tiny auxiliary gaskets are included for full conveyor‑drive system servicing.
Q: How will this sealing kit interact with construction‑site lubricants?
A: Nitrile rubber keeps stable dimensional property and low‑swelling rate against transmission gear oil and conveyor bearing grease.
Q: What abnormal conditions indicate oil seals should be replaced?
A: Lubricant leaks out from conveyor drive shaft end, conveyor runs unevenly, periodic scraping noise occurs and drive housing produces obvious over‑heat during paving work.
Q: What risk will scratch damage bring to electrophoretic coated shell?
A: Once the coating layer is scratched off, bare steel will corrode gradually, which may lead to seal loosening and unexpected oil leakage.
Q: How well can this full sealing kit block mud, gravel dust and hot gear oil mist on muddy outdoor road job sites?
A: The multi-layer flexible rubber lip scrapes thick mud off the shaft surface, the fully enclosed plated metal shell blocks coarse dust particles, and inner auxiliary rubber layers isolate high-temperature oil mist to protect internal precision gears.
6. Exhibition and Wearhous
Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.