412473 SCREW,Phil Pan Hd, M4 x 90mm, Cl 4.8 New.Holland parts of FX60, FX48
1. Quick Details of seal 412473:
| Part NO. | 412473 |
| Machine | Wheel loader |
| Size | M4 x 90mm |
| Material | Nitrile‑butadiene rubber |
| Oil seal type | SEAL LIP |
2. 412473 parts on group :
| NO. | PART NO. | PRAT NAME | QTY |
| 1 | 100012 | NUT,M4 x0.7,CI 8 | 1 |
| 1 | 9706690 | NUT,M8 x 1.25,CI 8 | 2 |
| 2 | 322355 | BELLEVILLE WASHER,M4 Bolt Size x 10mm ODx0.9mm Thk | 1 |
| 2 | 322358 | BELLEVILLE WASHER,M8 Bolt Size x 18mm ODx1.4mm Thk | 2 |
| 3 | 398224 | MULTIPOLE CONNECTOR,7 Pin | 2 |
| 3 | 265927 | POWER SOCKET | 1 |
| 4 | 412658 | SCREW,Phil Pan Hd, M4 x 40mm | 1 |
| 4 | 120104 | BOLT,Hex, M8 x 1.25 x 20mm, CI 8.8 | 2 |
| 5 | 140013 | WASHER.M4 | 2 |
| 6 | 20202 | SCREW,Phil Pan Hd, M4 x 30mm | 2 |
| 6 | B4074277 | SCREW | 2 |
| 7 | 445502 | REVERSING LAMP ASSY,12V, 5W | 1 |
| 8 | 470017 | BULB,C11,12V,5W | 1 |
| 9 | 9506872 | COVER | 1 |
| 10 | 9506873 | SEAL | 1 |
| 11 | 433132 | HYD CONNECTOR | 1 |
| 12 | 9508323 | PLUG | 1 |
| 13 | 9504337 | PLUG | 4 |
| 14 | 9507881 | HOUSING | 1 |
| 15 | 9504343 | PLUG | 1 |
| 16 | 322355 | BELLEVILLE WASHER,M4 Bolt Size x 10mm OD x 0.9mm Thk | 2 |
| 17 | 84002955 | WIRE HARNESS | 1 |
| 17 | 84035446 | WIRE HARNESS | 1 |
| 18 | 84002956 | WIRE HARNESS | 1 |
| 18 | 84035447 | WIRE HARNESS | 1 |
| 19 | 86511830 | SCREW,Phillips Drive, Pan HD, M6 x 20mm, CI4.8 | 4 |
| 20 | 140015 | WASHER,6.4mm ID x 14mm OD x 1.6mm Thk | 4 |
| 21 | 921928 | BUSHING | 4 |
| 22 | 322358 | BELLEVILLE WASHER,M8 Bolt Size x 18mm OD x 1.4mm Thk | 8 |
| 23 | 9814947 | SUPPORT | 2 |
| 24 | 378248 | WASHER,25mm ID x 50mm OD x 4mm Thk | 2 |
| 25 | 84022829 | PIN | 2 |
| 26 | 9503523 | PIN | 2 |
| 27 | 84042647 | SUPPORTING ARM | 1 |
| 28 | 84042648 | SUPPORTING ARM | 1 |
| 29 | 418870 | BULB,12V, 10W | 2 |
| 30 | 398877 | BULB.12V.21W | 4 |
| 31 | 84037090 | TAIL LAMP,12V, 21W, Amber/Red | 2 |
| 32 | 437024 | REFLECTOR | 1 |
| 33 | 435895 | REFLECTOR,80mm OD, Orange | 1 |
| 34 | 435967 | SPRING | 2 |
| 35 | 20010 | SCREW | 4 |
| 36 | 411809 | GROMMET | 2 |
| 37 | 322356 | BELLEVILLE WASHER,M5 Bolt Size x 12mm ODx 1.85mm Thk | 4 |
| 38 | 86508813 | NUT,M5, CI 8 | 4 |
| 39 | 84039003 | BUSHING | 1 |
| 40 | 441370 | BUSHING | 2 |
| 41 | 412473 | SCREW,Phil Pan Hd, M4 x 90mm, CI 4.8 | 2 |
| 42 | 335872 | WASHER,4.1mm ID x 15mm OD x 1.6mm Thk | 2 |
| 43 | 84019112 | COVER PLATE | 1 |
| 44 | 84061106 | WIRE HARNESS | 1 |
| 45 | 399986 | GROMMET | 1 |
| 22 | 16043224 | BOLT,Hex, M8 x 16mm, CI 8.8 | 8 |
3. 412473 picture:
4. Service part number :
| PART NO. | PART NO. | Part NO. |
| 254287 | 417171 | 480028 |
| 470380 | 90036 | 473016 |
| 370087 | 8660S | 370021 |
| 415995 | 254270 | 254287 |
| 455079 | 370018A | 415988 |
| 410625 | 471224 | 473214 |
5. FAQ
Q: Can this oil seal work steadily on rotating shaft assemblies?
A: Yes, the specially designed sealing lip fits rotary shafts to block internal lubricant leakage.
Q: Can this seal block site sand and muddy splashes from invading axle bearing cavity?
A: Yes, the auxiliary dust lip can effectively isolate external grit and muddy splashes, preventing internal lubricant leakage outward.
Q: What key installation points should operators keep in mind during replacement?
A: Keep shaft surface smooth without burrs, apply thin‑layer grease before pressing‑in; do not twist or scratch sealing lips during assembly.
Q: Does this repair kit contain all supporting sealing parts for one complete overhaul?
A: Yes, matching auxiliary gaskets and small accessory sealing pieces are fully included for full transmission shaft servicing.
Q: How is its performance with commonly‑used transmission lubricants?
A: NBR material delivers stable oil resistance, maintains low swelling rate for transmission gear oil and chassis bearing grease.
Q: What suggestions for warehouse storage of unopened seal kits?
A: Store in cool dry indoor space, avoid heavy stacking pressure, sharp cuts and long‑term exposure to heat sources.
Q: How will this sealing kit interact with construction‑site lubricants?
A: Nitrile rubber keeps stable dimensional property and low‑swelling rate against transmission gear oil and conveyor bearing grease.
Q: What abnormal conditions indicate oil seals should be replaced?
A: Lubricant leaks out from conveyor drive shaft end, conveyor runs unevenly, periodic scraping noise occurs and drive housing produces obvious over‑heat during paving work.
Q: What risk will scratch damage bring to electrophoretic coated shell?
A: Once the coating layer is scratched off, bare steel will corrode gradually, which may lead to seal loosening and unexpected oil leakage.
Q: How well can this full sealing kit block mud, gravel dust and hot gear oil mist on muddy outdoor road job sites?
A: The multi-layer flexible rubber lip scrapes thick mud off the shaft surface, the fully enclosed plated metal shell blocks coarse dust particles, and inner auxiliary rubber layers isolate high-temperature oil mist to protect internal precision gears.
6. Exhibition and Wearhous
Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.