455062 455-062 ROD,PISTON OF MX35
1. Quick Details of seal 455062:
| Part NO. | 455062 |
| Machine | Track‑type Excavator |
| Size | OEM |
| Material | HNBR hydrogenated nitrile rubber |
| Oil seal type | SEAL LIP |
2. 455062 parts on group :
| NO. | PART NO. | PRAT NAME | QTY |
| 1 | 452-050 | CYLINDER | 1 |
| 2 | 451-087 | BUSHING | 1 |
| 3 | 456-016 | SEAL,DUST (KIT) | 2 |
| 4 | 452-772 | HEAD,CYLINDER | 1 |
| 5 | 451-021 | BUSHING | 1 |
| 6 | 454-024 | PACKING,ROD (KIT) | 1 |
| 7 | 456-019 | SEAL,DUST (KIT) | 1 |
| 8 | 450-954 | RING,SNAP | 1 |
| 9 | 453-532 | O-RING (KIT) | 1 |
| 10 | 450-976 | RING,BACK-UP (KIT) | 1 |
| 11 | 453-533 | O-RING (KIT) | 1 |
| 12 | 455-062 | ROD,PISTON | 1 |
| 13 | 451-088 | BUSHING | 1 |
| 14 | 456-016 | SEAL,DUST (KIT) | 2 |
| 15 | 454-354 | PISTON | 1 |
| 16 | 450-989 | RING,PISTON (KIT) | 1 |
| 17 | 450-983 | RING,WEAR (KIT) | 1 |
| 18 | 454-969 | NUT | 1 |
| 19 | 452-421 | FITTING,GREASE | 1 |
| 20 | 458-135 | TUBE | 1 |
| 21 | 105-274 | BOLT | 1 |
| 22 | 455-220 | WASHER | 1 |
| 23 | 452-228 | ELBOW | 1 |
| 24 | 453-697 | O-RING (KIT) | 1 |
3. 455062 picture:
4. Service part number :
| PART NO. | PART NO. | Part NO. |
| 254287 | 455134 | 480028 |
| 470380 | 90036 | 456800 |
| 370087 | 8660S | 370021 |
| 417366 | 254270 | 254287 |
| 415085 | 370018A | 416332 |
| 410625 | 415027 | 473214 |
5. FAQ
Q: What construction machine does part number 455062 apply to?
A: Part number 455062 oil seal kit is specially designed for track‑type excavator swing motor assembly.
Q: What main work does part number 455062 complete on the excavator?
A: 455062 seal kit prevents hydraulic oil leakage from swing motor shaft and keeps sand and debris out of motor interior.
Q: What raw materials are adopted for this swing motor oil seal kit?
A: Sealing lip uses wear‑resistant HNBR hydrogenated nitrile rubber, supporting frame uses anti‑rust galvanized carbon steel.
Q: What color can buyers see for this sealing repair kit?
A: The rubber sealing part presents dark black, and the metal frame shows bright silver galvanized surface.
Q: What sealing accessories are contained in this whole repair set?
A: It includes main rotary shaft oil seal, garter spring, dust seal and matched auxiliary O‑ring groups.
Q: Where is this oil seal kit installed on track‑type excavator?
A: It is fitted at the shaft output end between swing motor housing and rotary connecting shaft.
Q: What real‑world benefits does Redicoat treatment bring for steel shell?
A: This coating improves shell bore‑fitting performance and rust resistance, adapting to muddy construction sites with mixed digging and travelling operations.
Q: How will this sealing kit interact with construction‑site lubricants?
A: Nitrile rubber keeps stable dimensional property and low‑swelling rate against transmission gear oil and conveyor bearing grease.
Q: What abnormal conditions indicate oil seals should be replaced?
A: Lubricant leaks out from conveyor drive shaft end, conveyor runs unevenly, periodic scraping noise occurs and drive housing produces obvious over‑heat during paving work.
Q: What risk will scratch damage bring to electrophoretic coated shell?
A: Once the coating layer is scratched off, bare steel will corrode gradually, which may lead to seal loosening and unexpected oil leakage.
Q: How well can this full sealing kit block mud, gravel dust and hot gear oil mist on muddy outdoor road job sites?
A: The multi-layer flexible rubber lip scrapes thick mud off the shaft surface, the fully enclosed plated metal shell blocks coarse dust particles, and inner auxiliary rubber layers isolate high-temperature oil mist to protect internal precision gears.
6. Exhibition and Wearhous
Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.