130-09-11450 1300911450 SEAL,OIL, TANK OF BF60-1 D20P-3
1. Quick Details of seal 130-09-11450:
| Part NO. | 130-09-11450 |
| Machine | Bulldozer |
| Size | 20*35*7mm |
| Material | NBR rubber |
| Oil seal type | SEAL LIP |
2. 130-09-11450 parts on group :
| NO. | PART NO. | PRAT NAME | QTY |
| 1 | 145-60-13120 | TANK | 1 |
| 3 | 145-60-33113 | TANK | 1 |
| 3 | 145-60-33111 | TANK | 1 |
| 5 | 04211-01055 | YOKE | 2 |
| 6 | 01582-01008 | NUT | 2 |
| 7 | 04205-01028 | PIN | 2 |
| 8 | 04050-03015 | PIN | 2 |
| 9 | 04245-01025 | ROD | 1 |
| 9 | 145-60-12210 | ROD | 1 |
| 10 | 170-78-14270 | LEVER | 1 |
| 11 | 01010-31030 | BOLT | 1 |
| 12 | 01602-01030 | WASHER | 1 |
| 13 | 145-60-33130 | LEVER | 1 |
| 14 | 145-60-32470 | LEVER | 1 |
| 15 | 01010-30830 | BOLT | 1 |
| 15 | 01000-30830 | BOLT | 1 |
| 16 | 01602-00825 | WASHER | 1 |
| 17 | 145-60-33140 | LEVER | 1 |
| 18 | 04010-00416 | KEY | 2 |
| 19 | 130-09-11450 | SEAL | 2 |
| 20 | 06120-02016 | BEARING | 4 |
| 21 | 170-78-14310 | SPACER | 2 |
| 22 | 07056-10045 | STRAINER | 1 |
| 22 | 130-60-13260 | STRAINER | 1 |
| 23 | 145-60-13160 | GAUGE,OIL LEVEL | 1 |
| 07051-00000 | CAP | 1 | |
| 24 | 07051-00001 | BODY | 1 |
| 25 | 04260-00952 | BALL | 1 |
| 26 | 07051-00002 | PLATE | 1 |
| 27 | 07051-00003 | GASKET | 1 |
| 28 | 04065-04518 | RING | 1 |
| 29 | 07044-13620 | PLUG | 1 |
| 29 | 07044-03620 | PLUG | 1 |
| 30 | 07000-03035 | O-RING (KIT) | 1 |
| 31 | 130-60-13181 | GASKET (KIT) | 1 |
| 32 | 01010-31025 | BOLT | 40 |
| 33 | 01602-01030 | WASHER | 40 |
| 34 | 01010-31440 | BOLT | 4 |
| 34 | 01040-31440 | BOLT | 4 |
| 34 | 01040-31435 | BOLT | 4 |
| 35 | 01602-01442 | WASHER | 4 |
| 35A | 01643-21432 | WASHER | 4 |
| 36 | 140-60-13320 | COVER | 1 |
| 37 | 01010-31460 | BOLT | 2 |
| 37 | 01040-31460 | BOLT | 2 |
| 38 | 01602-01442 | WASHER | 2 |
| 39 | 140-60-13350 | PLUG | 2 |
| 40 | 140-60-13360 | COLLAR | 1 |
| 41 | 01010-31075 | BOLT | 1 |
| 42 | 01602-01030 | WASHER | 1 |
| 43 | 07000-03020 | O-RING (KIT) | 1 |
| 44 | 140-60-13260 | COVER | 1 |
| 45 | 01010-31422 | BOLT | 10 |
| 45 | 01040-31422 | BOLT | 10 |
| 46 | 01602-01442 | WASHER | 10 |
| 47 | 07000-03020 | O-RING (KIT) | 10 |
| 48 | 07000-03042 | O-RING (KIT) | 4 |
3. 130-09-11450 picture:
4. Service part number :
| PART NO. | PART NO. | Part NO. |
| 707-99-67760 | 707-99-75470 | 707-98-62120 |
| 707-98-26620 | 707-98-38600 | 707-98-64450 |
| 707-98-26720 | 707-98-39610 | 707-98-66410 |
| 707-98-26820 | 707-98-39611 | 707-98-67100 |
| 707-98-26900 | 707-98-39700 | 707-98-67110 |
| 707-98-26901 | 707-98-40020 | 707-98-68400 |
| 707-99-66600 | 707-99-77220 | 707-35-52900 |
| 707-99-66610 | 707-99-77240 | 707-35-52910 |
| 707-99-66660 | 707-99-73150 | 707-98-56610 |
| 707-99-46120 | 707-99-64120 | 707-99-77220 |
| 707-98-25980 | 707-98-37130 | 707-51-95650 |
5. FAQ
Q: What construction equipment does part number 130‑09‑11450 apply to?
A: Part number 130‑09‑11450 oil seal kit is developed for bulldozer power‑shift clutch pressure chamber overhaul work.
Q: What raw materials are selected for producing the 130‑09‑11450 oil seal kit?
A: 130‑09‑11450 oil seal kit uses pressure‑resistant NBR rubber sealing lip and sturdy cold‑rolled steel reinforcing shell.
Q: What core sealing effect can this oil seal kit deliver after correct assembly?
A: It maintains stable hydraulic pressure inside clutch pressure chamber, and keeps dust and fine grit from entering the pressure cavity.
Q: Where is this oil seal kit arranged on the bulldozer?
A: It is installed at the internal cavity sealing joints of bulldozer power‑shift clutch pressure chamber.
Q: Where will this oil seal kit be mounted on the bulldozer?
A: It is installed at the rotating shaft sealing interface of bulldozer clutch housing unit.
Q: What risk will scratch damage bring to electrophoretic coated shell?
A: Once the coating layer is scratched off, bare steel will corrode gradually, which may lead to seal loosening and unexpected oil leakage.
Q: How well can this full sealing kit block mud, gravel dust and hot gear oil mist on muddy outdoor road job sites?
A: The multi-layer flexible rubber lip scrapes thick mud off the shaft surface, the fully enclosed plated metal shell blocks coarse dust particles, and inner auxiliary rubber layers isolate high-temperature oil mist to protect internal precision gears.
6. Exhibition and Wearhous
Oil seals,Hydraulic Seals, Cylinders Seal Kits, And More
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.