Stainless DN15 Boiler Zone Valve PN16 DC Actuator Motor Boiler Control
Stainless Heating Control Valve, Boiler Zone Valve, DN15, PN16 DC Actuator Motor
Product Description
The boiler zone valves are installed on the hot side of boiler, or the outside of heating pipe loop. Expose the valve to higher and more stressful temperatures. Zone valves are installed backwards, the ball valve must be installed so that the arrow on the valve body, matches the hot water flow direction.
Features
1. Extreme ong service life span ;
2. Manual Override, the valve can be operated when power failure;
3. Mini dimension and position indicator
4. Good sealing performance, IP65 enclosure
Application
- Prepay water meter, AMR water meter
- HVAC system heating, ventilation, air conditioning
- Baseboard/radiant heating
- Convectors
- Fan coil units
- Underfloor heating
- Unit ventilators
- VAV reheat
Advantages
- Sturday valve body with reasonable structure design, and best material to be used
| No. | Ours | Normal products |
| Valve shaft seal | Quadruple seals | Dual seals |
| Nut seal | Auto super anaerobic glue coating, Consistent torque tightening | Manual anaerobic glue, unevenly, non consistent torque tightening |
| Seal between valve body and housing | Seal groove | none |
| Torque | Smoothly and light | Heavy, non consistently |
| Drainage | Yes | none |
Technical data
| Material | brass, stainless steel, SS304, 316 |
| Operation pressure | PN16 |
| Type | mini motorised ball valve |
| Operate Pressure (Mpa) | PN10 |
| Torque (NM) | 2 |
| Dia range | DN15-40 |
| Open/close (S) | <13s depends on actuator motor |
| Work volt. (V) | DC3-6V, DC12V, AC220V |
| Media temp (℃) | 0-90 / 200 |
| Control | automatic motor actuator |
Factory show
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.