DN80 Pipe Electric Synchron Valve Motor , DC5V Geared Synchronous Motor

electric zone valve motor, motorized ball valve actuator products for DN80 pipe

Product description

For large diameter pipe and applications where higher torque is needed, our K10 geared motor actuator can be recommended. Our DC electric actuator motors can be attached to irrigation water meter, IC card prepay water meter, heat meter, motorized ball valve to control the electric ball valve open or close. The synchronous geared motor is an electric motor actuator in which, at steady state, the rotation of the shaft is synchronized with the frequency of the supply current; the rotation period is exactly equal to an integral number of electric cyles. 

Technical data-Model K09
1. Voltage: DC3.6 V (Range: DC2.5 - 5 V, the higher the voltage, the larger torque, the shorter life span)
2. Current at idle: <50 mA @ 3.6V, 23ºC
3. Current with max loading: <1100 mA (motor #500)
4. Torque: >25 NM
5. Open/close time: <90S
6. Velocity reduction ratio: 10000:1 (for DN80 / DN100 ball valve)
7. Protection: IP0

Wiring definition

Production overview