Geared Zone Valve Motor Replacement DC5V For DN15 Electric Ball Valve
zone valve motor 5V, geared synchronous motor for electric ball valve DN15
Product description
The 5V electric actuator motors are consisted of: the synchronous geared motor, it is one in which the rotor normally rotates at the same speed as the revolving field in the machine. The stator is similar to that of an induction machine consisting of a cylindrical iron frame with windings, usually located in slots around the inner periphery. The actuator can be attached to irrigation water meter, IC card prepay water meter, heat meter, motorized ball valve to control the electric ball valve open or close.
Technical data-Model K11
1. Voltage: DC3.6 V (Range: DC2.5 - 5 V, the higher the voltage, the larger torque, the shorter life span)
2. Current at idle: <25 mA @ 3.6V, 23ºC
3. Current with max loading: <450 mA (motor #300)
4. Torque: >1.8 NM
5. Open/close time: <10S
6. Velocity reduction ratio: 2200:1
7. Protection: IP0
Wiring definition
| No | Color of wire | Definition |
| 1 | blue | on position signal, valve open |
| 2 | white | on position signal, public |
| 3 | yellow | on position signal, valve close |
| 4 | black | positive (+) |
| 5 | red | negative (-) |
Production overview
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.