Dia 15mm Emit Ultrasonic Piezo Transducer Piezo Ceramic Transducer IP68
ultrasonic transducer piezoelectric for ultrasonic flow meter, housing: brass
Application of ultrasonic sensor:
The piezoelectric sensors, also called ultrasonic transducer: are widely used ultrasonic cleaning, welding, detection, B-medical, beauty equipment, acoustic tuansducer, micro-driven, ultrasonic flowmeter, and other fields.
What is it made of: ultrasonic sensor:
The ultrasonic transducer of high frequency, which is made up of an active element, a backing, and wearplate. Its active element is a piezoelectric or single crystal material which converts electrical energy to ultrasonic energy. It will also then receives back ultrasonic energy and converts it to electrical energy.
Product data sheet
| Technical parameters | |||||
| Model | CF17A | Center frequency | 975 + 30 KHz | Static capacity | 500 PF + 20% |
| Resonance impedance | <110 Ω | Protection | IP68 | Work temp. | < 85 ℃ |
| Pressure | >3.0 Mpa | Transmit beam angle | 5 – 10 |
Receive sensitivity |
>250 mv (half wave) |
| Housing material | Titanium alloy | Emit surface | Dia. 17 mm | Mounting surface | Dia. 21 mm |
| Seal |
Epoxy encapsulation |
Wiring | Center | Wire type |
Dia. 2.5 mm dual core |
| Technical parameters | |||||
| Model | 17B | Center frequency | 975 + 30 KHz | Static capacity | 500 PF + 20% |
| Resonance impedance | <110 Ω | Protection | IP68 | Work temp. | < 90 ℃ |
| Pressure | >3.0 Mpa | Transmit beam angle | 5 – 10 |
Receive sensitivity |
>300 mv (half wave) |
| Housing material | SS304+polymer | Emit surface | Dia. 17 mm | Mounting surface | Dia. 21 mm |
| Seal |
Epoxy encapsulation |
Wiring | Center | Wire type |
Dia. 2.5 mm dual core |
Parameters
Different options:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.