Piezoelectric Ultrasonic Transducer Transmitter For BTU Meter
ultrasonic transducer transmitter, piezoelectric sensor for BTU meter
The description of ultrasonic transducer:
The ultrasonic piezo sensor is one type of sound-related sensor. These ultrasonic transducers can send the electrical signals to the object, and once the signal strikes the object then it reverts to the transducer. The frequency range of ultrasonic waves is above a certain kHz. These are mainly used in measuring applications.
What is it made of: ultrasonic sensor:
The ultrasonic transducer of high frequency, which is made up of an active element, a backing, and wearplate. Its active element is a piezoelectric or single crystal material which converts electrical energy to ultrasonic energy. It will also then receives back ultrasonic energy and converts it to electrical energy.
Product data sheet
| Item 17SLW | Unit | Standard V | Item | Unit | Standard V |
| Center F(Fr) | KHz | 970±30 | Emit beam A | . | 5-10 |
| Resonant(R0) | Ω | <110Ω | Protection | IP65 | |
| Static C(CP) | pF | 900±20% | Pressure | MPa | ﹥2.6 |
| Receive sensitivity | mv | >280mv(half) | Wire lead way | mm | Center of sensor |
| Range | mm | Seal | Epoxy fill | ||
| Temperature | ℃ | <70° | Hole dia. | mm | Φ21 |
| Voltage | V | 3 | House material | High molecular | |
| NTC |
3950 10K 1% | ||||
| Technical parameters | |||||
| Model | 17B | Center frequency | 975 + 30 KHz | Static capacity | 500 PF + 20% |
| Resonance impedance | <110 Ω | Protection | IP68 | Work temp. | < 90 ℃ |
| Pressure | >3.0 Mpa | Transmit beam angle | 5 – 10 |
Receive sensitivity |
>300 mv (half wave) |
| Housing material | SS304+polymer | Emit surface | Dia. 17 mm | Mounting surface | Dia. 21 mm |
| Seal |
Epoxy encapsulation |
Wiring | Center | Wire type |
Dia. 2.5 mm dual core |
Parameters
Different options:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.