80km Single Mode 10G SFP+ Module , 1490 / 1550nm 10G SFP Fiber Module
10G SFP+ Module 80km 10G Single Mode 1490/1550nm 10G SFP Fiber Module
Description
NuFiber’s SFP-10G-BX80-SM1490/1550 series single mode transceiver is small form factor pluggable module for optical data communications such as 10G Ethernet. It is with the SFP+ 20-pin connector to allow hot plug capability. The SFP-10G-BX80-SM1490/1550 module is designed for single mode fiber and operates at a nominal wavelength of 1490nm or 1550nm; The transmitter section uses a EML laser, which is class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section consists of a APD photodiode integrated with a TIA. The transceiver designs are optimized for high perform -ance and cost effective to supply customers the best solutions for telecommunication.
Features
●Supports 9.95 to 11.3Gb/s bit rates
●Simplex LC Connector
●Hot pluggable SFP+ footprint
●Cooled 1490nm EML transmitter, 1550nm APD receiver
●Cooled 1550nm EML transmitter, 1490nm APD receiver
●Applicable for 80km SMF connection
●Low power consumption, < 1.5W
●Digital Diagnostic Monitor Interface
●Optical interface compliant to IEEE 802.3ae 10GBASE-ZR
●Electrical interface compliant to SFF-8431
●Operating case temperature:
Commerical:0 to 70 °C
Optical Parameters
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Operating Wavelength | λ | 1470 | 1490 | 1510 | nm | |
| 1530 | 1550 | 1565 | ||||
| Ave. output power (Enabled) | PAVE | 0 | 5 | dBm | 1 | |
| Side-Mode Suppression Ratio | SMSR | 30 | dB | |||
| Extinction Ratio | ER | 9 | dB | |||
| RMS spectral width | Δλ | 1 | nm | |||
| Rise/Fall time (20%~80%) | Tr/Tf | 50 | ps | |||
| Dispersion penalty | TDP | 3.2 | dB | |||
| Relative Intensity Noise | RIN | -128 | dB/Hz | |||
| Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
| Receiver | ||||||
| Operating Wavelength | λ | 1530 | 1550 | 1565 | nm | |
| 1470 | 1490 | 1510 | ||||
| Receiver Sensitivity | PSEN1 | -22 | dBm | 2 | ||
| Sensitivity over 80Km fiber | PSEN2 | -20 | dBm | 2 | ||
| Overload | PAVE | -7 | dBm | |||
| LOS Assert | Pa | -35 | dBm | |||
| LOS De-assert | Pd | -24 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 | dB | |||
Products Show
Packaging & Shipping
Factory Show
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.