OEM 10G Copper RJ45 Module 30m Marvell Chipset Rate Matching mode

Price Negotiable

Price: Negotiable

MOQ: 1 piece

Delivery Time: Within 1-3 work days

Brand: NUFIBER

Product Description

OEM 10G Copper RJ45 Module 30m Marvell Chipset Rate Matching mode

PRODUCT DESCRIPTION

SFP+-10GBASE-T-RM Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T/ 5Gbase-T /2.5Gbase-T/1000base-T standards as specified in IEEE Std 802.3. SFP+-10GBASE-T uses the SFP's RX_LOS(must be pulled up on host) pin for link indication. If pull up or open SFP's TX_DISABLE pin, PHY IC will be changed to low-power state.

PRODUCT FEATURES

Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T on line port
Support 10Gbase-R on host port
Hot-pluggable SFP footprint
Compact RJ-45 connector assembly
RoHS compliant and lead-free
Single +3.3V power supply
10 Gigabit Ethernet over Cat 6a cable
Ambient Operating temperature:0°C to +70°C

Cable Length

Link Port	Cable	Reach	Host Port
10Gbase-T	CAT6A	30m	10GBase-R
5Gbase-T	CAT5E	50m	10GBase-R
2.5Gbase-T	CAT5E	50m	10GBase-R
1000base-T	CAT5E	100m	10GBase-R
100base-T	CAT5E	100m	10GBase-R

+3.3V Volt Electrical Power Interface

The SFP+-10GBASE-T has an input voltage range of 3.3 V +/- 5%. The 4V maximum voltage is not allowed for continuous operation.

+3.3 Volt Electrical Power Interface
Parameter	Symbol	Min	Typ	Max	unit	Notes/Conditions
Supply Current	Is		900	1100	mA	3.6W max power over full range of voltage and temperature. See caution note below
Input Voltage	Vcc	3.13	3.3	3.47	V	Referenced to GND
Maximum Voltage	Vmax			4	V
Surge Current	Isurge		TBD		mA	Hot plug above steady state current. See caution note below