100G QSFP28 Transceiver singlemode BIDI 500m LC for cisco huawei hp hot pluggable Simplex LC connector 1 lanes
Price:
Negotiable
MOQ:
1 piece
Delivery Time:
Within 1-3 work days
Brand:
NuFiber
Product Description
QSFP28 100Gb/s DR 500m Transceiver
QSFP28-100G-DR1
Features
Ø IEEE 100GBASE-DR compliant
Ø 100GE Single Protocol (103.125 Gb/s)
Ø CAUI-4 compliant - 4x 25.78125 Gb/s
Ø 100GAUI-4 compliant–4x 26.5625 Gb/s
Ø RS-FEC(544,514) FEC coder/decoder function
Ø < 3.5 W MAX
Ø 0 to 70ºC
Ø Single cooled 100Gb/s 1310nm EML
Ø Single PIN PD + low-power TIA
Ø SFF-8636 management interface
Applications
Ø Data Center 100G 500m SMF links
Ø Switch/Router interconnections
Ordering Information
| Part No. | Description |
| QSFP28-100G-DR1 | 100GBASE-DR QSFP28 500m Single Mode Fiber Transceiver, 0 to 70 ºC |
- Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit | Remarks |
| Supply Voltage | Vcc | 0 | +3.6 | V | +3.3 V |
| Storage Temperature | -40 | 85 | °C | ||
| Optical Receiver Input | - | +5.0 | dBm | Average |
- Operating Environment
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Remarks |
| Supply Voltage | Vcc | 3.135 | 3.3 | 3.465 | V | |
| Supply Voltage Noise Tolerance | PSNR | - | - | 66 | mV | 10 Hz –10 MHz |
| Power Consumption | - | - | 3.5 | W | Target | |
| Supply Current | -- | - | 1010.1 | mA | Steady state | |
| Case Temperature | TC | 0 | 25 | 70 | °C |
- Optical Characteristics
| Description | Value | Unit | Notes |
| Transmitter | |||
| PAM4 Signaling rate (range) | 53.125 ± 100 ppm | GBd | |
| Lane wavelengths (range) | 1304.5- 1317.5 | nm | |
| Side-mode suppression ratio (SMSR), (min) | 30 | dB | |
| Average launch power (max) | 4 | dBm | |
| Average launch power (min) | -2.9 | dBm | 1 |
| Outer Optical Modulation Amplitude (OMAouter) (max) | 4.2 | dBm | |
| Outer Optical Modulation Amplitude (OMAouter) (min) | -0.8 | dBm | 2 |
| Launch power in OMAouter minus TDECQ (min) ER≥5dB2 | -2.2 | dBm | |
| Launch power in OMAouter minus TDECQ (min) ER<5dB2 | -1.9 | dBm | |
| Transmitter and dispersion penalty Eye Closure for PAM4 (TDECQ), (max) | 3.4 | dB | |
| TDECQ – 10*log10(Ceq) (max) | 3.4 | dB | 4 |
| Average launch power of OFF transmitter (max) | -15 | dBm | |
| Extinction ratio (min) | 3.5 | dB | |
| Optical return loss tolerance (max) | 15.5 | dB | |
| Transmitter reflectance (max) | -26 | dB | 3 |
| Transmitter transition time (max) | 17 | ps | |
| RIN15.5 OMA (max) | -136 | dB/Hz | |
| Receiver | |||
| PAM4 Signaling rate (range) | 53.125 ± 100 ppm | GBd | |
| Lane wavelengths (range) | 1304.5 to 1317.5 | Nm | |
| Damage threshold (min) | 5 | dBm | 5 |
| Average receive power (max) | 4 | dBm | |
| Average receive power (min) | -5.9 | dBm | 6 |
| Receive power (OMAouter) (max) | 4.2 | dBm | |
| Receiver reflectance (max) | -26 | dB | |
| Receiver sensitivity (OMAouter) (max) | −3.9, ��������−5. | dBm | 7 |
| Stressed receiver sensitivity (OMAouter) (max) | -1.9 | 8 | |
| Conditions of stressed receiver sensitivity test | 9 | ||
| Stressed eye closure for PAM4 (SECQ) | 3.4 | dB | |
| SECQ – 10*log10(Ceq) (max) | 3.4 | dB | 10 |
Notes:
- Average launch power, each lane (min) is informative and not the principal indicator of signal strength. A transmitter with launch power below this value cannot be compliant; however, a value above this does not ensure compliance.
- Even if the TDECQ < 1.4 dB for an extinction ratio of ≥ 5 dB or TDECQ < 1.1dB for an extinction ratio of < 5 dB, the OMAouter (min) must exceed this value.
- Transmitter reflectance is defined looking into the transmitter.
- Ceq is a coefficient defined in IEEE Std 802.3-2018 clause 121.8.5.3 which accounts for reference equalizer noise enhancement.
- The receiver shall be able to tolerate, without damage, continuous exposure to an optical signal having this average power level
- Average receive power, each lane (min) is informative and not the principal indicator of signal strength. A received power below this value cannot be compliant; however, a value above this does not ensure compliance.
- Receiver sensitivity (OMAouter), (max) is informative and is defined for a transmitter with a value of SECQ up to 3.4 dB.
- Measured with conformance test signal at TP3 (see IEEE Std 802.3cd clause 140.7.10) for the BER specified in IEEE Std 802.3cd clause 140.1.1.
- These test conditions are for measuring stressed receiver sensitivity. They are not characteristics of the receiver.
- Ceq is a coefficient defined in IEEE Std 802.3-2018 clause 121.8.5.3 which accounts for reference equalizer noise enhancement.
- RX_LOS Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Remarks |
| Receiver Loss of Signal Indicator Assert Level | RX_LOS | -30 | - | -7.5 | dBm | Average power |
| Receiver Loss of Signal Indicator De-assert Level | RX_LOS | - | - | -7 | dBm | Average power |
- Electrical Characteristics
| Parameter | Min. | Typ. | Max. | Unit | Remarks |
| Transmitter (each lane) | |||||
| Differential pk-pk input voltage tolerance (min) | 900 | - | - | mV | at TP1a |
| Differential termination mismatch | - | - | 10 | % | at TP1 |
| Single-ended input voltage tolerance range | -0.4 to 3.3 | - | - | V | at TP1a |
| DC common mode voltage | -350 | - | 2850 | mV | at TP1 |
| Receiver (each lane, at TP4) | |||||
| AC Common-mode output voltage (RMS) | - | - | 17.5 | mV | |
| Differential output voltage | - | - | 900 | mV | |
| Eye width | 0.57 | - | - | UI | |
| Eye height, differential | 228 | - | - | mV | |
| Vertical eye closure | - | - | 5.5 | dB | |
| Differential termination mismatch | - | - | 10 | % | |
| Transition time (20% to 80%) | 12 | - | - | ps | |
| DC common mode voltage | -350 | - | 2850 | mV | |
Notes:
1. Electrical Rx output is squelched for loss of optical input signal.
Products Show
Applications:
Packaging & Shipping
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen Fivision Digital Technology Co.,Ltd
Location
4/F, Building 4, Weihao Industry Park, No.1026, Songbai Road, Xili Town, Nanshan District, Shenzhen, China. 518055
Contact Person
Hilary Lin