S1SPI-UA-A 1uA Sub GHz Module 14dBm With ST Spirit-1 Chipset
S1SPI-UA-A Sub GHz module with ST Spirit-1 chipset
|
Parameter
|
Min
|
Typ
|
Max
|
Unit
|
|
|
Operating Voltage
|
1.8
|
-
|
3.6
|
V
|
|
|
Operating Temperature
|
-20
|
-
|
+70
|
℃
|
|
|
Current
Consumption |
Sleep Mode
|
-
|
-
|
1
|
uA
|
|
|
Receive mode
|
-
|
9.5
|
12
|
mA
|
|
|
Transmit Mode
|
-
|
44
|
47.5
|
mA
|
|
TX Power (For Carrier)
|
-
|
-
|
14
|
dBm
|
|
|
RX Sensitivity (For Lora Modulation)
|
-
|
-
|
-118
|
dBm
|
|
|
Distance
|
HA:110
UA:230 |
m
|
|||
|
Parameter
|
Min
|
Typ
|
Max
|
Unit
|
|
|
Operating Voltage
|
1.8
|
-
|
3.6
|
V
|
|
|
Operating Temperature
|
-20
|
-
|
+70
|
℃
|
|
|
Current
Consumption |
Sleep Mode
|
-
|
-
|
1
|
uA
|
|
|
Receive mode
|
-
|
9.6
|
10
|
mA
|
|
|
Transmit Mode
|
-
|
49
|
57
|
mA
|
|
TX Power (For Carrier)
|
-
|
-
|
14
|
dBm
|
|
|
RX Sensitivity (For Lora Modulation)
|
-
|
-
|
-118
|
dBm
|
|
|
Distance
|
HA:110
UA:230 |
m
|
|||
S1SPI-UA-A Sub GHz module with ST Spirit-1 chipset
S1SPI-HA/UA/NA-A Module is designed based on Spirit1. The Spirit1 is a very low-power RF transceiver, intended for RF wireless applications in the sub-1 GHz band. It is designed to operate both in the license-free ISM and SRD frequency bands at 169, 315, 433, 868, and 915 MHz, but can also be programmed to operate at other additional frequencies in the 300-348 MHz, 387-470MHz, and 779-956 MHz bands. The air data rate is programmable from1 to 500 kbps, and the Spirit1 can be used in systems with channel spacing of 12.5/25 kHz, complying with the EN 300 220 standard. It uses a very small number of discrete external components and integrates a configurable baseband modem, which supports data management, modulation, and demodulation. The data management handles the data in the proprietary fully programmable packet format also allows the M-Bus standard compliance format (all performance classes). However, Spirit-1 can perform cyclic redundancy checks on the data as well as FEC encoding/decoding on the packets. The Spirit1 provides an optional automatic acknowledgement, retransmission, and timeout protocol engine in order to reduce overall system costs by handling all the high-speed link-layer operations.

Q1: Are you a factory or trade company?
A1: We are a professional factory with 25 years experience.
Q2: Can you accept OEM/ODM?
A2: Sure, we have rich OEM&ODM experience.
Q3: Do you have quality assurance?
A3; Each of our products has undergone quality testing and has two years of free after-sales service.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.









