20MHz True RMS Desktop Digital Multimeter Capacitance Measurement
20MHz True RMS Desktop Digital Multimeter Capacitance Measurement
VICTOR 8155 220000 counting 5½ digits desk-type true-RMS digital multimeter with USB 1000V 10A Capacitance measurement.
Introduction
VICTOR 8155 is a full-featured, 199999 counting 5½ digits desk-type true-RMS digital multimeter with stable performance. The STM32 chip and external integration AD chip used by the meter offer strong overall functionality, excellent performance, and good experience for users; its 3.5-inch large-screen has clear displays of reading, rich content, and a good result of display. It is mains-powered driving which makes it highly reliable. Its comprehensive features, full-range overload protection and unique design make it the first choice for electricians and university laboratories.
In addition, VICTOR 8155 are equipped with the calibration function which allows the user to calibrate according to actual needs and is simple and convenient.
Basic features
- 5½-digit resolution ratio
- 3.5-inch large-screen display with rich content, clear display of reading, and a good result of display.
- Dual parameter display: it can display two parameters of the same input signal (for example, with the AC voltage measurements, it can display simultaneously AC voltage and AC frequency value).
- Measurement speed points: FAST (6 times / second) → MID (4 times / sec) → SLOW (1 times / sec).
- Duty cycle measurement function
- Square wave output function
- Manual / automatic range setting function
- Communication interfaces: USB Device, RS232
- Support SCPI protocol and provide programming file
- AC and DC voltage, DC current, two-wire / four-wire resistance measurement.
- Cycle and frequency measurement, frequency of up to 20MHz.
- Capacitance measurement.
- Provide automatic trigger, external trigger, and single trigger measurements.
- Measurement capabilities for current up to 10A and voltage up to 1000V DC.
- Keypad lock function and system setup; languages, buzzer, screen brightness and so on can be configured according to various needs.
- Simple external calibration function
- Variety of mathematical functions: statistics (maximum, minimum), relative measurement, dB, dBm.
- On-off, diodes, reading hold, data hold / reading, key tone, trigger measurement and so on.
3. General indicators
1-1 Mode of display: 3.5-inch LCD display;
1-2 Maximum display: 220 000 (5 1/2) automatic polarity display and unit digit display;
1-3 Range selection: automatic / manual;
1-4 Note to over-range: the screen displays "-OL-";
1-5 Measuring rate: fast (6 times / sec), medium (4 times / sec), slow (1 times / sec);
1-6 Power supply voltage: AC 220V ± 10%, 50Hz;
1-7 Working environment: (0 ~ 40) ℃, relative humidity <80%;
1-8 Storage environment: -10 ~ 50 ℃, relative humidity <80%;
1-9 Dimensions: 265mm x 105mm x 330mm (width X height X depth);
10 Weight: 2.3kg;
Main technical indexes
| Model | VICTOR 8155 | |
| Display screen | 3.5” TFT LCD (resolution of 320*480) | |
| Number of display digits | 5 1/2 | |
| Signal terminal | Front | |
| Fastest measuring speed | 6 readings/s | |
| Function | No. | Uncertainty, ±(% of reading + least significant digit ) |
|
DCV
|
Uncertainty | 0.015%+ 3 |
| Measurement range | 1 uV~1000 V | |
| Maximum resolution | 1uV | |
|
ACV |
Uncertainty | 0.2%+ 100 |
| Measurement range | 1 uV~750 V | |
| Maximum resolution | 1uV | |
| Frequency range | 40Hz ~ 100kHz | |
|
DCI |
Uncertainty | 0.05% +10 |
| Measurement range | 0.001 uA ~ 10 A | |
| Maximum resolution | 0.001uA | |
|
ACI |
Uncertainty | 0.3%+400 |
| Measurement range | 0.001 uA ~ 10 A | |
| Maximum resolution | 0.001uA | |
| Frequency range | 40 Hz ~ 5kHz | |
|
Resistance |
Uncertainty | 0.02%+ 6 |
| Measurement range | 0.001 Ω ~20MΩ | |
| Maximum resolution | 0.001Ω | |
| Frequency/cycle | Uncertainty | 0.1%+3 |
| Measurement range | 200 Hz ~20 MHz | |
| Maximum resolution | 0.001Hz | |
|
Capacitance |
Uncertainty | 2%+5 |
| Measurement range | 2nF ~ 10 mF | |
| Maximum resolution | 1 pF | |
| Mathematical functions: | Relative measurement, max/min, dB, dBm, reading hold | |
| Data storage/reading | Yes | |
| Interfaces | USB Device, RS232,(Optional:USB Host LAN,Gpib) | |
| Trigger measurement | Yes | |
| Square-wave output | Yes | |
| Fast measurement | Yes | |
| Resistance 4-line measurement | Yes | |
| External trigger measurement | Yes | |
| AC+DC measurement | Yes | |
| Calibration | Yes | |
| On-off/diode | Yes | |
| Limit test function | Yes | |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.