Phenolic Resin Hydraulic Guide Ring Seals 40*35*10mm OEM ODM

Phenolic Resin Hydraulic Guide Ring Seals 40*35*10mm OEM ODM

Advantages of editing Voice

1. The sealing ring should have good sealing performance within the working pressure and a certain temperature range, and can automatically improve the sealing performance as the pressure increases.

2. The friction between the sealing ring device and the moving parts should be small, and the friction coefficient should be stable.

3. The sealing ring has strong corrosion resistance, not easy to age, long working life, good wear resistance, and can automatically compensate to a certain extent after wear.

4. Simple structure, convenient use and maintenance, so that the sealing ring has a longer life.

Precautions

1. Clean the installation location;

2. Remove the burrs during the installation movement of the seal;

3. Apply lubricant on the seals;

4. Protect the sealing surface from damage;

5. Recheck to confirm that the size of the seal is correct;

6. Use corresponding tools to install the seals that need to be deformed and installed.

1. Do not open the seal package if unnecessary, otherwise the dust will stick to the seal or scratch it.
2. Store in cool place, not on sunlight place. UV and moisture will accelerate the deterioration of rubber and plastics and dimensional changes
3. Carefully pack, store unpackaged product, do not glue or put into impurities, keep the original state. Keep the Nylon seal package close to prevent moisture cause dimensional changes
4. Do not put seals near heat sources, such as boilers, stoves. Otherwise heat will accelerate the aging of seals
5. Do not put seals near the motor and other place where produces ozone
6. Do not use a needle, wire, rope hang seals, otherwise, would cause the seal deformation, damage the lip
7. Sometimes, there are color change or white powder on the seal surface (frost phenomenon), this will not affect the performance of the seal