Single Pack Home Rapid Chlamydia Test , 0.5mg/L-100.0mg/L SAA Swab Rapid Test Card

SAA Inflammation Test Kit Cassette Strip Point Of Care Home Use Single Pack

Anti-interference ability Anti-interference ability: When cholesterol ≤15mg/ml, bilirubin ≤2mg/ml, triglyceride ≤30mg/ml, there is no obvious influence on the test results.

Performance characteristics

• Linear range: 0.5mg/L～100.0mg/L, take the same batch of SAA reagent to the concentration of 0.0mg/L, 5.0mg/L, 25.0mg/L, 50.0mg/L, 100.0mg/L Serum amyloid A samples were tested, and the correlation coefficient was r≥0.9900.
• Precision: intra-assay precision CV≤15.0%, inter-assay relative deviation R≤15.0%.
• Accuracy:The Relative Deviation is within ±15.0%.
• Blank limit: should not exceed 0.10ng/ml.

Precautions and warnings

1. This product is only used for in vitro diagnosis.

2. This reagent contains animal-derived ingredients, and its biological safety complies with the regulations, but it is still treated as a potentially dangerous substance.

3. The reagent contains chemical components. Avoid eating or touching the skin and mucous membranes. If you accidentally splash the reagent into your eyes, please rinse with plenty of water immediately, and seek medical attention if necessary.

4. The samples and waste liquid generated after testing should be treated as the source of infection, and the packaging materials after use should be treated in accordance with relevant regulations.

5. Do not insert the test card whose surface is wetted by other liquids into the detector, otherwise it may cause contamination or damage to the instrument.

6. The batch number of the test card, the batch number of the buffer solution and the batch number on the ID chip should be consistent, otherwise the test results may be inaccurate.

7. If the kit is stored for a long time, it is recommended to store it at 2℃～8℃.

8. See the label for the production date and expiry date.

Components