Durable protective top Polyester Clear Powder Coating with High gloss China manufacturer Kinte

This series of products is one kind of thermoset powder coating made of polyester resins and hardener with transparent material.

Advantages of powder coatings

1. Health and environmental protection

All kinds of liquid chemical harmful film-forming, dispersion, wetting, leveling, anti-corrosion and anti mildew additives added to achieve coating performance are omitted.

2. Convenient transportation and storage

Ordinary coatings contain about 20-50% water or solvent, while powder coatings are completely solid without water or solvent, which is convenient and safe for transportation. In addition, coatings containing water or solvent tend to freeze when the transportation and storage temperature is lower than 0 ℃. This problem does not exist in powder coatings.

3. No preservative is required

In the traditional liquid coating, there is both water and bacterial food, which is easy to be polluted by bacteria. Therefore, in order to prevent deterioration, preservatives should be added, while latex powder coatings have no bacterial pollution and do not need preservatives

4. Paint smell

Compared with the general traditional coating smell residue, this coating can disperse quickly, which can be said to disappear immediately.

Advantage:

---Glossy and shining

---Accurately reflecting the base color due to high transparency and clarity,

---Excellent clarity and flowing

---Endurance performance to long-term outdoor environment and keeping the coating color well

---Good matching with various liquid paint and powder coating

Appliance field:

Specially designed for the surface coating of aluminum wheel hub,with high standard transparency. Suitable for high performance coating film of various metal appliances, such as metal frame, bicycle, lock, door handleUsed as protective coat for metal powder coating

Property:

Density: 1.2~1.8g/cm3(Owing to the different formula and different colors)

Particle size: Different purposes varies, the standard for the average particle size is 35 ~ 40um,

smaller than 10um< 10%, greater than 100um < 0.5%

Storage stability: Polyester Clear Powder Coatings should be stored below 30°C in a dry and well ventilated place away from source of heat and direct sunlight. If stored in an air-conditioner room, in order to avoid damp again, before using the powder, the powder should be kept at the room temperature or at the same temperature with the spray equipment. Under such condition, the powder can be stored stably for 12months. Extended, retest will be required. If the testing result meets the requirement, the powder can still be used.

Film Characteristics:

Spraying: This series product is suitable for the following spraying methods: corona electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed spraying, fluidized bed thermal spraying and other spraying methods(For the last 3 methods, please requested in advance)

FilmThickness:40~150μm, depending on the application requirements

Curing Guide: 200°C/10min or customizing design, for example160℃/20min,180℃/10min