150mm AC Current Clamp Probe , 4Ohm Clip On Type Current Transformer
AC Current Probe in Digital Energy Meters Accuracy Class 0.5
Introduction
The model Q150 current clamp on measuring instrument can be used for a current vector for the copper bar or the power aluminum bus bar on-line detection.
Applications
- for large current testing occasions, also can With cable fault tester and cable identification instrument,
- apply to cable testing work.
- jaw: Φ150mm
- size: 229mm×364mm×44mm
- Load capacity: MA output≤4Ω,1A output 0.1Ω, 5Aoutput 2.5va
- Installation method: clamp type
- Output: down-lead output
Parameter
| Electrical parameters | |
| Ratio | (customized) |
| Accuracy class | 0.2%, 0.5%, 1% |
| Primary current | 0 - 3000A AC |
| Secondary current | 0 - 5A AC (customized) |
| Max. Cont. Input current | 3600A |
| Over voltage category | CAT III 600 V |
| Output signal (AC current) | 500mA,1A,5A AC at nominal input current |
| Electrical parameters - continued | |
| Output signal (AC voltage) | 333mV,500mV,1V,5V AC at nominal input current |
| Frequency range | 40Hz-2000Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 600 V |
| Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation | Clamp type |
| Output mode | Lead output (2.5m) |
| Mechanical parameters | |
| Dimensions (L x W x H) (mm) | 229mm×364mm×44mm |
| Weight (g) | 1200 |
| Holding wire diameter (mm) | φ150 |
| Max. jaw opening (mm) | 50 |
| Jaw color | White |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
We offer technical and commercial assistance to our customers, serving them to maintain their time and cost schedules; we offer valuable solution and help our partners to win with excellent quality with competitive prices and good after sales service; we are devoted to develop and setup partnership with our clients to get one win-win.
Our management team and experienced staff are committed towards meeting our client’s specific objectives by offering valuables.
Our mission is: Focus on power field, basing on technology and innovation, providing valuable solution, grow together with our partners in the world.
Welcome to visit us and we are here ready to provide all the necessary assistances you want, sincerely hope we can have good chances to work together and setup long term cooperation relationships.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.