Model: NPM-D3

Board Size (mm)*1:
Dual Lane: L50×W50～L510×W300
Single Lane: L50×W50～L510×W590
Board Changeover Time:
Dual Lane: 0 seconds*Cannot be 0 seconds when the cycle time is below 3.6 seconds.
Single Lane: 3.6 seconds*When using the short-type conveyor specification.
Power Supply: Three-phase AC200, 220, 380, 400, 420, 480V, 2.7kVA
Air Supply*2: 0.5MPa, 100L/min (A.N.R.)
Equipment Dimensions (mm)2: W832×D2652×H14443*4
Weight: 1680kg (Main unit only; may vary depending on optional components)
Placement Head Options:

Lightweight 16-nozzle head (with 2 arms) - ON High Production Mode
Placement Speed: 84,000 CPH (0.043 seconds/component)
IPC9850: 63,300 CPH*5
Placement Accuracy (Cpk≧1): ±40μm/component
Component Size (mm): 0402 chip*7～L6×W6×T3
Component Supply:

Tape Width: 8/56mm
8mm Tape: Maximum 68 lanes (with 8mm thin single reel feeder and dual reel feeder, small reel)
Placement Head Options:

Lightweight 16-nozzle head (with 2 arms) - OFF High Production Mode
Placement Speed: 76,000 CPH (0.047 seconds/component)
IPC9850: 57,800 CPH*5
Placement Accuracy (Cpk≧1): ±30μm/component (±25μm/component*6)
Component Size (mm): 030 chip*7～L6×W6×T3
Placement Head Options:

12-nozzle head (with 2 arms)
Placement Speed: 69,000 CPH (0.052 seconds/component)
IPC9850: 50,700 CPH*5
Placement Accuracy (Cpk≧1): ±30μm/component
Component Size (mm): 0402 chip*7～L12×W12×T6.5
Placement Head Options:

8-nozzle head (with 2 arms)
Placement Speed: 43,000 CPH (0.084 seconds/component)
Placement Accuracy (Cpk≧1): ±30μm/QFP 12mm/32mm, ±50μm/QFP below 12mm
Component Size (mm): 0603 chip～L100×W90×T28
Stick: Max. 8 lanes, Tray: Max. 20 (with 1 tray feeder)
Placement Head Options:

2-nozzle head (with 2 arms)
Placement Speed: 11,000 CPH (0.327 seconds/component)
IPC9850: 8,500 CPH (0.423 seconds/QFP)
Tape Width: 8/56/72/88/104mm

The NPM-D3 high-speed module mounting machine has the following performance characteristics:

High productivity per unit area: Through a comprehensive physical assembly production line, achieve high output of installation and inspection, and improve production efficiency.

System flexibility: Customers can freely choose the actual production line according to their needs and freely set the position of the work head through the plug and play function.

System management function: Implement overall management of production lines, workshops, and factories through system software, including dynamic monitoring and support for planned production.

Multiple mounting options: NPM-D3 comes with lightweight 16 nozzle mounting heads, 12 nozzle mounting heads, 8 nozzle mounting heads, and 2 nozzle mounting heads, which can be selected according to your needs.

Dual track printing function: NPM-D3 supports dual track printing and is directly connected to the NPM-D3 dual track module machine at the printing front end.

System software features: NPM-D3 is equipped with various system software functions, including mounting height control system, operation guidance system, APC system, component calibration option, automatic machine cutting option, and upper communication option.

Multifunctional production line: Adopting dual track conveyor belts, different types of substrates can be mixed and produced within the same production line.

Overall, the NPM-D3 high-speed module mounting machine has the characteristics of high production capacity, high precision, flexibility, and versatility, providing efficient mounting solutions.