SC Quick Field Assembly Fiber Optic Connector SC Fast Connector For FTTH FTTX
SC Quick Field Assembly Fiber Optic Connector SC Fast Connector For FTTH FTTX
SC Quick Filed Assembly Fiber Optic Connector is also called Field Assembly Connector or Field terminated fiber connector or quickly assembly Fiber connector.
SC Quick Filed Assembly Fiber Optic Connector is a revolutionary field installable optical fiber connector that requires no epoxy and no polishing, this connector during the installation process does not require any adhesive and curing process.
Using this onsite assembly optical connector, it is possible to improve the flexibility of optical wiring design as well as reducing the time required for fiber termination. The Fast connector series are already a popular solution for optical wiring inside buildings and floors for LAN & CCTV applications and FTTH.
SC Fiber Optic Fast Connector Optical Characteristics:
| Category | Specification | Remarks | |
| Aoolicable for | 3.0mm×2.0mm(Drop cable.Indoor cable) | ||
| 2.0mm×1.6mm(Drop cable.Indoor cable) | |||
| Fiber mode | Single mode or Multi mode | ||
| Operation time | About 50(no fiber cut) | ||
| Insertion Loss | dB | ≤0.5 | |
| Insertion Loss Typical value | dB | 0.3 | |
| Return Loss | dB | ≥45 | |
| Fastening strength of naked fiber | N | ≥5 | |
| Tensile strength | N | ≥50 | |
| Reusable | Time | ≥10 times | |
| Operating Temperature | ℃ | -40～+85 | |
| On-line tensile strength(20N) | dB | ΔIL≤0.3 | |
| Mechanical durability(500 times) | dB | ΔIL≤0.3 | |
| Drop-off test(drop-off height4m,once per direction,totally 3 times) | dB | ΔIL≤0.3 | |
Environmental performance requirements:
|
Category |
Specification | |||
| Condition | IL Variation | RL Variation | Appearance | |
| High TEMP | 110℃,200H | ≤0.5 | ≤5 |
No mechanical damage, like deformation, cracking and untight |
| Low TEMP | -40℃,200H | ≤0.5 | ≤5 | |
|
TEMP Cycling |
-40～85℃,3.5H/Cle, 100C | ≤0.5 | ≤5 | |
| HAST | 110℃,90%RH,200H | ≤0.5 | ≤5 | |
| Immersion | 25℃,200H | ≤0.5 | ≤5 | |
| Salt Mist |
5% Nacl,6.5＜PH＜ 7.5,35℃,200H |
≤0.5 | ≤5 | |
Mechanical Performance Requirements:
|
Category |
Specification | |||
| Condition |
IL Variation |
RL Variation |
Appearance | |
|
Impact |
Height: 4m； 1 drop each axis； 3 cycles |
≤0.5 |
≤5 |
No mechanical damage, like deformation, cracking and untight |
|
Vibration |
Frequency: 10 ～ 50HZ； Sweep: 45 times / min； amplitude: 0.75mm； Duration:30min each axial |
≤0.5 |
≤5 |
|
|
Torsional |
Pull:15N； The distance between Loading location and fast connector: L = 22-28cm；Rate:10times / min. Times: 200 |
≤0.5 |
≤5 |
|
|
Tensile |
Pull:50N； The distance between Loadi ng location and fast conn ector: L = 22-28cm； Duration:1min. |
≤0.5 |
≤5 |
|
SC Fiber Optic Fast Connector Features:
- No epoxy and polishing required
- Quick and easy fiber termination
- Precision mechanical alignment insures low insertion loss
- Superior optical performance
- Streamlined component design, convenient operation
- Pre-installed, on-site assembly without end face grinding and consideration
- Uses proven, molded v-groove technologies
- Allow optical continuity to be verified by use of visual fault locator (VFL)
SC Fiber Optic Fast Connector Applications:
- Fiber optic communication system and telecommunication networks
- Fiber optic data transmission
- CATV
- Optical access
SC Fiber Optic Fast Connector Packing Pictures:
Why choose TAKFLY--Advantages as follows:
Professional manufacturer:
- With more than 21 years manufacturing experience in Fiber optic products;
- More than 450 assembly workers with 3 years experienced;
- More than 36 R&D Engineers;
- 16 Sets Germany imported Injection Machine and 16 Production Lines;
- More than 30 sets of Testing Machines: OTDR,3D,VFL,IL&RL test instrument; tension strenth tester, Crush Resistance tester, Power meter tester, light checker, ect.
- OEM Brand is acceptable.
- Exhibition: OFC, ECOC, CommunicAsia, NETCOM, AFRICACOM, SVIAZ ICT, CommunicIndonesia ,Global Soure Electronic Exhibition,etc.
Quality Control:
- Spot check the raw material incoming inspection before production;
- Fully check after every individual process finished;
- Fully check production half done;
- Fully check the finished products before packing;
- Spot check before shipping;
Delivery:
- Samples: 1-3 working days.
- Mass Production Order: 3-7 working days.
- Packaging: Plastic Bag, Carton and Pallet are available according to your request.
Price: If your QTY is big, the price could be negotiated.
I have been working in this field more than 6 years, I believe, I could give you very good service and professional answers!
If you’re interested in our products or have any doubt, why not send me inquiry at once?
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.