SGS 4 Bobbin Head Wire Pay Off Machine Fiber Optic Cable Machine
Fiber/Tight Buffered Fiber/Steel Wire Motorized Pay-Off Machine
1. Structure for 12 Heads Optical Fiber Motorized Pay-Off Machine:
One cabinet contains four fiber heads and three wire cabinets.Suspension shaft structure, clamp sleeve,Multi-wheel choreographer control sync signal,The driver adopts the dongguan universal 750KW ac motor and DANFOSS frequency conversion system,The spool is treated with abrasion resistance, and all the guides are treated with hard anodic oxidation. Optical fiber disk locking device, the structure is spring ball.It has the function of fiber - cutting alarm.
2. Specification for 2/4/6/ Heads Optical Fiber Motorized Pay-Off Machine:
Suspension type pay off,pay off unit have separately control switch.The constant tension pay off ,is equipped with the upper and lower limit of the dance wheel, the alarm of the drive failure and the automatic response stop function.Swing lever type weight to adjust tension, wheel groove surface smooth.
-
Drive: 400W gear motor+Danfoss transducer
-
Pay off no.: 4heads for fiber and 2heads for tight buffered fiber
-
Bare fiber diameter: Φ0.25～Φ0.40mm.
-
Pay off speed: 190m/min(structure speed)
-
Fiber Pay off tension: 0.5N～1.5Ｎ±0.1Ｎ(can adjust)
-
Fiber Pay off bobbin size: Φ236×Φ25.4×108mm(25KM),Φ265×Φ25.4×180mm(50KM)
-
Fiber bobbin weight: 10Kg
3. Main paramters for Fiber/Tight Buffered Fiber/Steel Wire Motorized Pay-Off Machine:
|
Bobbin size |
Ф236×Ф160×Ф25.4×108mm,Ф265×Ф160×Ф25.4×180 mm,400mm |
|
Structure speed |
(10～750)m/min |
|
Shaft hole size |
φ25.4mm |
|
The diameter of the shaft is pulsing |
≤0.1mm |
|
Wire drum MAX weight |
Max.25kg |
|
Fiber Pay-off tension |
0.5N～1.5Ｎ±0.1Ｎ(can adjust) |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.