Rubber Industrial Airbags Double Convoluted Air Springs For SAF Holland 57007180

Industrial Airbags Double Convoluted Aftermarket Air Springs For SAF Holland 57007180

Cross Reference

Airspring Supplier: Goodyear
Reference: 578923309; 578 92 3 309; 578-92-3-309
Competitor/Supplier Number: 2B12-425; 2B12 425; 2B12425; 2B12 311; 2B12 311; 2B12311

Airspring Supplier: Contitech
Competitor/Supplier Number: FD 33022363; FD 330-22 363; FD 330 22 363

Airspring Supplier: Triangle
Reference: 6316
Competitor/Supplier Number: 4363

Suspension Supplier: Kwiklok/Todco(Jifflox)

Airspring Supplier: Vibracoustic
Competitor/Supplier Number: VSP2B22R7180

Suspension Supplier: EI Ride
Competitor/Supplier Number: 8030190

Suspension Supplier: Hendrickson
Competitor/Supplier Number: 1VA1816

Suspension Supplier: Leland
Competitor/Supplier Number: SC2075

Suspension Supplier: Navistar
Competitor/Supplier Number: 1685179C1

Suspension Supplier: SAF Holland
Competitor/Supplier Number: 57007180

Suspension Supplier: Peerless
Competitor/Supplier Number: 0550 00001

Suspension Supplier: Ridewell
Competitor/Supplier Number: 1003587180C

Suspension Supplier :Watson&Chalinl
Competitor/Supplier Number: AS01541 G/01881F

Firestone Trimmed: W01-358-7180; W01 358 7180; W013587180; WO13587180; WO1 358 7180; WO1-358-7180; w01-358-7180; w01 358 7180; w03587180; FIRESTONE FLEX 22

Advantages and characteristics of rubber air springs

Plastic selection of the relative height, bearing capacity and stiffness coefficient of the torsion spring: When using, the relative height, bearing capacity and stiffness coefficient of the torsion spring can be selected individually and widely, and the soft torsion spring characteristics can be obtained.
Relative height of torsion spring: Applying a pressure regulating valve of relative height, the relative height of the rubber air spring can be operated moderately according to the application regulations, and maintain a certain relative height when the spring load changes.
Bearing capacity: For rubber air springs of the same specification, changing the gas pressure can obtain different bearing capacities. The bearing capacity is probably positively related to the gas pressure. This achieves the same application of a variety of load specifications.
Stiffness coefficient: When designing the bending stiffness, it can be selected by changing the gas pressure of the torsion spring. The bending stiffness is approximately positively related to the gas pressure. Therefore, the bending stiffness can be selected to be very low. For a specification, the bending stiffness is Adjustable, it changes with the change of load, so the natural frequency does not change basically under any load, so it can make the supported system have basically unchanged characteristics.

The reated picture of air springs/convoluted air spring/air bag/air balloon