W01-M58-6875 WO1M586875 Suspension Air Bag Pipe Air Springs For ROR 2122 6068 TS16949

Pipe Air Springs W01-M58-6875 WO1M586875 Double Convoluted Suspension Air Bag For ROR 2122 6068

 
Cross Reference
 
Firestone Style 22D1.5
Air spring supplier/competitor: Firestone
Supplier//competitor: W01-M58-6875; W01 M58 6875; W01M586875; WO1-M58-6875; WO1 M58 6875; WO1M586875; w01-m58-6875; w01 m58 6875; w01m586875; wo1-m58-6875; wo1 m58 6875; wo1m586875

Air spring supplier/competitor:ROR
Supplier//competitor:  2122 6068; 21226068

Specifications and Technical Parameters
 

Convolution: Double

Top plate blind nuts qty: 2pcsM10

Bottom plate blind nuts qty: 2pcsM10

Air inlet: M12×1.5, Centered

HS Code: 8708809000

Girdle Hoop: One piece

Material: Rubber and Iron

Temperature: -30~+70℃

Sample: Available

Bumper: Without

Two Ply Bellows

Material: Rubber and steel

Product name: Airbag, airbag cylinder, air spring assembly, air bellow, rubber bellow, air balloon, air pillow, air shocks

The steps of using the pipeline air spring

1. Before use: first connect the pipeline air spring with the inflatable equipment accessories, and do a leak test. Put the inflated pipeline air spring into a basin filled with water and hold it down. It is the same as testing the air leakage of a bicycle belt to see if there are any air bubbles. If there are no air bubbles, it can be used. If there are air bubbles, there is an air leak. The phenomenon needs to be repaired.

2. When using: Put the pipeline air spring into the pipeline completely. If it is necessary for personnel to go down and operate it, be sure to install the flange to ensure the safety of the personnel. Use pipes, pressure gauges, air pumps and other inflation tools at the end of the gas nozzle of the pipeline air spring Connect well, and then inflate according to the scale on the pressure gauge. When inflating, if the pipeline air spring expands to one side, the air pressure cannot be pumped up. If you continue to inflate at this time, the airbag will explode. At this time, it is necessary to check whether the silt in the pipeline is cleaned up. The inner wall must be flat and there should be no burrs, otherwise the airbag will be punctured.

3. After use: Open the valve of the pipeline air spring, slowly deflate it, and then pull out the pipeline air spring vertically. Be careful not to puncture the pipeline air spring by nearby things, which will affect the next use.

Other 22D1.5 Style air spring

W01-358-7447

W01-681-7688

The picture of AIRSUSTECH Air Bag / air spring / air balloon/ air shocks/ air spring assembly