3/4NPT W01-358-6956 WO13586956 Suspension Air Springs For American PICK-UP

3/4NPT W01-358-6956 WO13586956 Double Convoluted Suspension Air Springs For American PICK-UP

Cross Reference
 

Specifications and Technical Parameters

Top plate blind nuts qty:  2pcs

Bottom plate blind nuts qty: 2pcs

Screw center distance: 1.75''

Air fittings/Air inlet/Air hole: 3/4NPT

Top cover plate diameter: 4.50''

Bottom cover plate diameter: 4.50''

Min. height: 2.6

Max. height: 8.0

Max. OD: 6.4

Rubber bumper: NO

Girdle hoop: 1 piece

Bead plate

Two ply Bellows

Double Convoluted/ Convolution Air Spring

Rubber and Steel Material

Double Convolution 
2-Ply Bellows
Style #255-1.5; 267-1.5
Blind Nuts
 

Air spring use in pick up cars

Air springs, also known as air bags or air suspension kits, can be used in pickup trucks to help with towing and hauling heavy loads with safety and comfort. They are typically used in place of conventional steel springs and can improve suspension alignment and performance .By using air springs, the vehicle can maintain its ride height and stability, and the suspension system can better handle the extra weight. Air springs can also improve ride quality and comfort for passengers in the truck.

Other usage

1. Industrial machinery: Air springs can isolate machines and equipment from vibration and shock.

2. Agriculture equipment: Air springs are commonly used on agricultural equipment such as tractors and combines, to provide a smoother ride and better ground-following capabilities.

3. Railways: Air springs are used on trains and railways to provide a smoother ride, reduce wear and tear on the tracks, and improve safety.

4. Construction equipment: Air springs can be used on construction equipment to improve ride comfort, reduce wear on tires and suspension components, and provide better stability.

5. Aerospace: Air springs can be used in aerospace applications to isolate equipment from shocks and vibrations.

Standard two ply air spring bellows is actually made up of four layers

a. An inner liner of calendered rubber.
b. One ply of fabric reinforced rubber.
c. A second ply of fabric-reinforced rubber (with the cords at a specific bias angle to the first ply).
d. An outer cover of calendered rubber.

Components

1. Air fitting
2. Blind nut: Used for mounting the part.
3. Upper bead plate: Permanently crimped to bellows to form an airtight assembly which allows for leak testing before the unit leaves the factory. Zinc/chromate plated for rust protection.
4. Girdle hoop: Wire wound type shown, molded into the bellows.
5. Bellows
6. Lower bead plate: Usually the same as upper bead plate, except without air inlet

The picture of AIRSUSTECH Air Bag / air spring / air balloon/ air shocks/ air spring assembly