M31101 Norgren Suspension Air Spring 10''×1 Pneumactic Air Actuator 4×M10 Bolts

AIRSUSTECH 1B10 ×1T Cross Code

• Design Height: 118 mm
• The Center Distance of Cover Plate: 181 mm
• The O.D. of Cover Plate: 210 mm
• Natural Outer Diameter: 235 mm
• The Lenght of Bolts: 25 mm
• Air Connection: G1/2
• Bolst Type: 4×M10
• Material: natural rubber and steel plate

Air springs provide unique solutions in many drive and vibration isolation applications around the world. In addition to the common uses, there are many less well-known uses due to the special structure.

Air springs are often used to isolate impact forces. Air springs are often used in sawmills to absorb the impact of falling logs and to lift logs onto conveyors. Air springs are best suited for such applications because they have the properties of both springs and rubber. Without such shock absorption, the equipment and its surrounding structures would suffer premature fatigue damage due to the frequent impact of falling logs.

Air spring bellows with rim ring structure can be used as protective covers or flexible couplings. Due to their flexible structure and ability to allow eccentric and torsional movement, air springs are the best solution for protective covers and flexible couplings. Considering the protection of the inner surface of the air spring from the influence of flowing materials, an internal sleeve is required.

Introducing air springs into cam followers can greatly increase the life of the cam. The air spring eliminates the rigid contact and friction of the traditional cam follower, thereby significantly reducing the wear on the cam surface, and also makes the cam mechanism run smoother, reducing fatigue damage to the entire mechanism.