1B9-202 Machine Air Spring Goodyear 578913201 Vibration Isolation Solutions for Vibrating Table

AIRSUSTECH 1B9202 refer to 1B9-202 Goodyear product description:

The air spring shock absorber AIRSUSTECH 1B9202 refer to 1B9-202 Goodyear can only push the bellows towards the workpiece, otherwise it must be equipped with a stroke limiter at the end of the stroke, otherwise the bellows will be overloaded

• In order to press the air spring shock absorber AIRSUSTECH 1B9202 refer to 1B9-202 Goodyear to the minimum height, a restoring force is required. Usually, this is achieved by applying a load

• The entire bearing surface of the upper and lower plates of the air spring shock absorber AIRSUSTECH 1B9202 refer to 1B9-202 Goodyear must be used to absorb the force

• Before disassembling the air spring shock absorber AIRSUSTECH 1B9202 refer to 1B9-202 Goodyear, the internal air must be released to prevent accidents and personal injury.

• During operation, the rubber air spring shock absorber AIRSUSTECH 1B9202 refer to 1B9-202 Goodyear shall not be in contact with other parts

AIRSUSTECH 1B9202 Cross OEM Original Equipment Manufacturer:

AIRSUSTECH Part Number:1B9202

Goodyear Part Number:1B9-202

Goodyear Bellwos Number:578913201

❶Nut/blind nut Top plate screw (nut) teeth: 2 x 3 / 8-16UNC top plate screw center distance: 89 mm bottom cover plate screw (nut) teeth: 2 x 3 / 8-16UNC bottom plate screw center distance : 89 mm
❷Air hole/air inlet/air fitting air hole/air inlet: 1/4 the center distance between NPT nut and air inlet: 44.5mm
❸ Top plate diameter (width): 160 mm, bottom cover diameter (width): 160 mm bell-shaped rubber bellows rubber bellows diameter: 222 mm compression height: 100 mm / 4.1 inches maximum height: 160 mm working stroke: 60 mm
❺Bumper block/bumper block without bumper
❻Belt loop/belt loop with belt loop: without belt loop