1B5-500 Suspension Air Springs AIRSUSTECH Single Air Bag 1K130070
1B5-500 Air Suspension Spring Single AIRSUSTECH 1K130070 For Lumber Industry Machine
Weight and packing of AIRSUSTECH 1K130070:
Net Weight:1.0 KG
Gross Weight:1.3 KG
Package Size:160mm*160mm*160mm
Compressed height:55mm
Maximum Height:90mm
Full stroke:35mm
Working medium:water, air
Working pressure:< 0.7Mpa
Burst pressure:> 1.6Mpa
Endurance cycle:> 10"
Temperature:-35℃ ~+60℃
Quick details:
| Model | Path |
0.7Mpa Max |
Capacity | ||
| 0.2Mpa | 0.5Mpa | 0.7Mpa | |||
| 130070K-1 | 110 | 150 | 107 | 304 | 439 |
| Trip | Weight |
0.7Mpa Frequency |
|||
| Minimum height | Safe height | ||||
| 55 | 90 | 0.95 | 1.08 | ||
AIRSUSTECH 1K130070 product description:
The air spring shock absorber AIRSUSTECH 1K130070 refer to goodyear 1B5-500 can only push the bellows towards the workpiece, otherwise it must be equipped with a stroke limiter at the end of the stroke, otherwise the bellows will be overloaded
• In order to press the air spring shock absorber AIRSUSTECH 1K130070 refer to goodyear 1B5-500 to the minimum height, a restoring force is required. Usually, this is achieved by applying a load
• The entire bearing surface of the upper and lower plates of the air spring shock absorber AIRSUSTECH 1K130070 refer to goodyear 1B5-500 must be used to absorb the force
• Before disassembling the air spring shock absorber AIRSUSTECH 1K130070 refer to goodyear 1B5-500, the internal air must be released to prevent accidents and personal injury.
• During operation, the rubber air spring shock absorber AIRSUSTECH 1K130070 refer to goodyear 1B5-500 shall not be in contact with other parts
AIRSUSTECH 1K130070 Cross OEM Original Equipment Manufacturer:
AIRSUSTECH Part Number:1K130070
Goodyear: 1B5-500
| AIRSUSTECH 1K130070 Technical Parameters | |
| Top Cover Plate Diameter | 160mm |
| Bottom Cover Plate Diameter | 160mm |
| Screw Center Distance | 89mm |
| Distance Gas Hole Between Nut | 44.5mm |
| Gas Hole | 1/4NPTF |
| Screw (Nut) Tooth | 2pcsXM8 |
| Rubber Bellows Diameter | Natural Φ220mm |
| The Height | Natural 110mm |
❶Nuts/blind nuts
Number of top plate screws: 2
Number of bottom cover screws: 2
Nut distance: 44.5 mm
Nut screw: M8
❷Air hole/air inlet/air fittings
Air hole/air inlet: G1 / 4
❸Cover plate
Top plate diameter: 85 mm
Diameter of the bottom cover: 85 mm
❹Rubber bellows
Straight diameter of rubber bellows: 130 mm
In 0.7 pa, rubber bellows diameter: 150 mm
Working stroke: minimum 50 mm to maximum 100 mm
Design height of rubber bellows: 70 mm
❺Bumper block/bumper block
No bumper block
❻Belt loop/Belt loop
Without belt loop
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.