88538 Air Spring 2H235152 Air Ride Spring Type F2 For Steel Smelting

Air Spring Model 20 Type F2 High Temp. Code 88538 Pneumatic Actuator For Steel Smelting Equipment

AIRSUSTECH 2H235152 Cross OEM Original Equipment Manufacturer:

AIRSUSTECH 2H235152

AIRSUSTECH rubber bellows 2B235

Model:20
Type: F2

 High Temp. code -88538

Specifications and Detail Technical Parameters

❶Nut/blind nut

Top plate screw (nut) teeth: 8XM10X1.5
The screw center distance of the top cover plate: 160.3 mm
Screw (nut) teeth of the bottom cover plate: 8XM10X1.5
The screw center distance of the bottom cover plate: 160.3 mm

❷Air hole/air inlet/air fittings
Air hole/air inlet:1 / 2
Screw center distance between air hole and nut:  80.15 mm

❸Cover plate
Top plate diameter: 190 mm
Diameter of the bottom cover:190mm

Bell rubber bellows
Maximum diameter of rubber bellows: 255 mm
Natural diameter of rubber bellows: 230 mm
Working stroke: minimum 80 mm to maximum 265 mm
Maximum height: 265mm
Minimum height: 80mm
Stroke height: 175mm

❺Bumper block/bumper block
No bumper block

❻Belt loop/Belt loop
There is a belt hoop: a belt hoop

AIRSUSTECH 2H235152 replaces Air Spring Model:20, Type: F2, High Temp. code -88538 product description:

The air spring shock absorber AIRSUSTECH 2H235152 replaces Air Spring Model:20, Type: F2, High Temp. code -88538 can only push the bellows towards the workpiece, otherwise it must be equipped with a stroke limiter at the end of the stroke, otherwise the bellows will be overloaded

• In order to press the air spring shock absorber AIRSUSTECH 2H235152 replaces Air Spring Model:20, Type: F2, High Temp. code -88538 to the minimum height, a restoring force is required. Usually, this is achieved by applying a load

• The entire bearing surface of the upper and lower plates of the air spring shock absorber AIRSUSTECH 2H235152 replaces Air Spring Model:20, Type: F2, High Temp. code -88538 must be used to absorb the force

• Before disassembling the air spring shock absorber AIRSUSTECH 2H235152 replaces Air Spring Model:20, Type: F2, High Temp. code -88538 , the internal air must be released to prevent accidents and personal injury.

• During operation, the rubber air spring shock absorber AIRSUSTECH 2H235152 replaces Air Spring Model:20, Type: F2, High Temp. code -88538 shall not be in contact with other parts