Contitech FT 530-30 Industrial Air Springs 3/4 NPT Gas Filled Triple Convoluted Bags

3/4 NPT Gas Filled Contitech FT 530-30 Industril Air Springs Triple Convoluted Bags

Refer NO.

Contitech FT 530-30

Contitech FT 530 30

Contitech FT530-30

Contitech FT530 30

Specifications and Detailed Technical Parameters: 3B6383-38

• Nut/blind nut

Top plate screw (nut) teeth: 4×3/8-16UNC

Bottom cover plate screw (nut) teeth: 4×3/8-16UNC

Screw Center Distance: 159mm

• Air hole/air inlet/air fittings

Air hole/air inlet: 3/4NPT

Distance from air hole to screw: middle

• Rubber Bellows

Top plate diameter (width): 289mm

Diameter (width) of the bottom cover plate: 289mm

Rubber Bellows MAX Diameter: 353mm

The Working Stroke: 381mm

• Bumper block/bumper block

Without bumper block

• Belt loop/Belt loop

With belt loop: Two belt loop

Other types:

The related picture of 3B6386

Application of air spring in industrial machinery

In mechanical shock absorption, rubber air spring generally adopts constraint film type and free film type two structures. Rubber air springs can be used in a variety of mechanical devices for damping, motion control or pressurization. Compared with cylinder or other elastic components with the same function, rubber air spring has simple structure, reliable operation, does not need complex parameter calculation and structural design, no sealing leakage problem, easy to use and maintenance, and long life.

For example, in stamping processing, such as stamping car cover, door, etc., all need to use the necessary buffer device. Buffer is subjected to large and periodic impact load in processing, and its performance directly affects the processing density of products. If the rubber air spring is used as the buffer, the processing cost can be reduced and the processing accuracy can be guaranteed.

It is also used in large washing machine isolation, improve the damping effect, reduce the noise of operation, so as to improve the quality of life of people.