3.7kW IP67 CE and RoHS Certified Portable EV Charger with IC-CPD Mode 2 Functionality
Charging time, Consumption(kWh)
Charging voltage /current/ power, Total electricity(kWh),Temperature
Current adjustable from 6A to 16Ain steps of 1A
Delay charging setting
The screen and LED can automatically turn off according to the set time
Optional
Appointment forcharging (based on data and time on the APP)
APP remote control (Bluetooth and WlFl)
Chargingmode (APP/Plug and Play)
View charging records on the APP
Charger Drawing
Product Model: EVX03B – Specifications
| Category | Item | Specification |
|---|---|---|
| Electrical Parameters | Input / Output Voltage | AC 110V / 230V |
| Input Frequency | 50 / 60 Hz | |
| Max. Output Power | 1-Phase up to 3.68 kW (230V, 16A) | |
| Max. Output Current | 16A for 1-Phase | |
| Standard | EN IEC 62752:2024 | |
| Certificate | CE, RoHS | |
| Protection | Over Voltage Protection | Yes |
| Under Voltage Protection | Yes | |
| Over Load Protection | Yes | |
| Short Circuit Protection | Yes | |
| Leakage Protection | Yes | |
| Over-Temp Protection | Yes | |
| Function & Accessory | LED Indicators | Yes |
| LCD Screen | 1.47-inch | |
| RCD | Type A (Type B optional) | |
| Current Adjustment | Yes | |
| WiFi / Bluetooth | Optional | |
| Relay Adhesion Detection | Yes | |
| RFID Manageable | No | |
| Working Environment | Protection Degree | IP67 |
| Operation Temperature | -30℃ ~ +55℃ | |
| Relative Humidity | ≤95% RH | |
| Operating Elevation Limit | ≤2000 m | |
| Cooling | Natural Air Cooling | |
| Standby Power Consumption | < 1 W | |
| Mechanical Parameters | Charging Cable | 5 m (Standard configuration) |
| Control Box | H × W × D = 195 × 91 × 49 mm | |
| Weight | ≤ 3.0 kg | |
| Colour | Black | |
| Material | PC (Flame retardant, UV resistant) |
How to install
Step 1: Put the wall bracket in a proper position on the wall, mark theposition of the top two screw holes on the wall using a pencil.
Step 2: Put down the wall bracket and drill the holes just marked. insertthe expansion plugs and fix the wall bracket to the wall usingself-tapping
screws.
Step 3: First insert the device into the upper mounting hole of the wallbracket. Then into the round hole of the bottom bracket andfix it on the wall bracket using combination screws.
Packaging
Certification
Exhibition
Visits from Various Countries (looking forward to your arrival)
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.