GMT 7.5mil Luxury 1.52*15m Janpanese TPU Car Paint Protection Film

GMT Car Paint Protection Film consists of Japanese TPU and American Removable Clear Press Sensitive Glue. With an ultra-thin polyurethane, or polymer, which when properly applied by a professional (typically an auto detailing or vinyl installation expert), forms a transparent protective surface layer. This disposable “skin” protects a car’s clear coat, gloss increasing, as well as the paint beneath it from things like surface scratches, UV exposure, hard water deposits, acid rain, oxidation, heat difference and various other unpleasantries.

Our company has more than two decades of experience to do car vinyl wraps, with a factory price, diverse options and patience service, you will be satisfied with us in all the ways.

If you are interested in our car wrap vinyl film products or you have other questions about vinyl wraps, you are welcome to consult us for any vinyl car wraps problem you have suffered, so please feel free to contact us.

1, Environmental fabric, imported glue
All fabrics comply with EU RoHS standards. Under normal conditions, GMT PPF does not release any hazardous chemicals or airborne hazardous chemicals. The thickness of imported glue is best for installation and repositionable, slideable, removable, no residue.

2. Smart Installation, save your labor and money
GMT car wraps have water cube and big square air channels technology with imported glue and repositionability. Any films that reduces the time of installation will reduce your labor costs, making you more competitive. An average of 80% of a total wrap cost is labor.

Step 1. A clean surface is vital for a successful installation, so keep the car clean, dust-free plant is strongly suggested.

Step 2. Spray amount of water or soap water on the surface of car.

Step 3. Remove the back of the transparent protective TPU film.

Step 4. Pick up your film and apply to the car.

Step 5. When paste the stickers from one side to other side, and slowly tear.

Step 6. Use your squeegee to push out any water and air bubbles. Use your sharp blade to carefully trim the excess film at the edges, using the frame as a guide.

Step 7. Finally use the paper towels to dry the car and the frame, being carefully not to lift the film at the edges or corners.