Liquid Fireproof Pu Foam ISO14001 Liquid Fireproof Pu Sealant Foam

Price Negotiable

Price: Negotiable

MOQ: 1200Cartons

Delivery Time: 7-10days

Brand: Junbond

Product Description

Liquid Self-expansion Fireproof Pu Foam For Door Window Frame Mounting

Junbond®  PU Foam Spray polyurethane foam is a one-component, economical type and good performance Polyurethane foam. It is fitted with a plastic adapter head for use with a foam application gun or a straw. The foam will expand and cure by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with excellent mounting capacities, high thermal and acoustical insulation.Gun-straw dual use spray PU foam is our patented product which can be used by gun and straw.
 
Application:
 
1. Sealing of expansion and settlement joint of house building, plaza, road, airport runway, anti-wall, bridges and tunnels, building doors and windows etc.

2. Sealing of upstream face crack of drainage pipeline, drains, reservoirs, sewage pipes, tanks, silos etc.

3. Sealing of through holes on various wall and at floor concrete

4. Sealing of joints of prefab, side fascia, stone and color steel plate, epoxy floor etc.
 
Technical Parameters:

Type	One Component PU Foam	Base	Polyurethane foam
Consistency	Stable Foam	Curing System	Moisture-cure
Tack-Free Time(min)	5~ 15	CuttingTime(hour)	≥0.8
Yield(L)	52~ 57	Shrink	None
Cellular Structure	80- 90% closed cells	Temperature Resistance	-40℃~+80℃
Application Temperature Range	-10℃~+35℃	Color	off-white
Fire Class	B1/B2	Compressive Strength(kPa)	>180
Tensile Strength(kPa)	>30(10%)	Adhesive Strength(kPa)	>120

Surface Preparation

lSurface should be cleaned of dust and mortar clods

lSurface should be sprayed with water using water sprayer

lProtect window profiles from the foam’s outgrow

Product Preparation

lThe can temperature should be between +10 ºC to +30ºC

lOptimal temperature of can is +20 ºC

l If can temperature is too low, the product should be put into warm water of +30 ºC for 15 minutes or left overnight in room temperature.

Product Application Instruction

lShake the can vigorously(20-30 seconds valve down) in order to mix the components

lScrew the can onto the adaptor

lThe working position is valve down

lVertical gaps should be filled from down to up

lDo not fill the whole gap-foam grows in volume

l If you fill window or door gaps, the gaps maximum gap size should be 3 cm. Foam should not be used in gaps larger than 5 cm.

lThe speed of application and the thickness of the bead should be controlled by the adequate pressure on the gun or adaptor trigger.

l If you stop the application for time longer than 5 mins, remember to shake the can before continuation of works.

Finishing Works

lThe excess of foam should be cut after the foam has cured. The foam should not be pushed back into the gap when it’s still uncured as it will cause structural defects and worsen insulation effect.

lAfter the foam has fully cured it should be protected from UV by mortar or paint.

l If you want to keep using the same can after longer time the gun and the adaptor and valve should be cleaned with the cleaner for polyurethane foams.

l Mechanical connectors recommended for doors mounting

Application Conditions

Can temperature	+10°C to +30°C
Ambient temperature	+10°C to +30°C
Surface temperature	+10°C to +30°C
Relative ambient humidity	≥60%

FAQ:

Q-Do you ship worldwide?
A-Yes
Q-What are your delivery time?
A- 7-14 days after received deposit 1×20GP Container
Q-Are you a factory?
A-Yes
Q-What's your payment?
A-Paypal,Visa,L/C,T/T,Escrow etc
Q-Could you supply free samples?
A-Yes
Q-What's transportation do you have?
A-Ocean,air and courier