Flame Retardant Rubber Flooring For Healthcare Facilities
Description
Healthcare flooring plays a vital role in establishing employee and patient safety within the design of a healthcare facility. The right medical flooring material will help personnel perform their job functions comfortably and efficiently, prevent bacteria accumulation and keep the care environment relaxing and conducive to healing.
Properties of Rubber flooring/Flame-retardant rubber floor/Anti-slip flooring
1. Excellent wear-resistant: Long lifetime
2. Halogen-free: Non-toxic gas
3. Excellent footfall sound absorption
Advantages:
1-- Excellent wear-resistant
2-- offering Fantastic underfoot feeling;
3-- Excellent indentation resistance for heavy use areas;
4-- Very easy to clean
Brief Introduction
|
Name
|
Rubber Flooring
|
|
Total
Thickness
|
1.5/2/ 2.5 /3.0mm
|
|
Wear Layer
Thickness:
|
Complete layer as wear layer
|
|
Width
|
2m/1.8m
|
|
Color
|
In Relle range of more than one thousand reference
|
|
Design
|
Grains /Plain texture
|
|
Features
|
1. Durable
2. Anti-bacterial 3. Anti-slippery 4. Water resistance 5. Abrasion resistance 6. Fire resistance 7. Recyclable |
|
Service
|
1. Strict quality control system.
2. perfect after-sales service. |
· Easy to decorate, colorful and plenty of patterns to choose from.
· Fire resistant. dam proof and anti-skidding.
· Low swell ratio, environment protecting and non-toxic.
· Easy to use, low material waste
· Good at abrasive resistant, resistance to soiling, antibiotic.
· Anti-indentation, good mute performance.
COLOR DESIGN
| classification | requirements | results | method | test Description | |
| General properties | color fastness to artificial light | 6 minimum blue wool scale ≥3 on grey scale | fulfilled | BS EN ISO105 B02:1992 | Color changes measured in response to changes in lighting |
| residual indentation | nominal thickness ＜2.5mm average value ≤0.2mm |
fulfilled | BS EN433:1994 | product indentation measured from loads | |
| flexibility diameter of Mandel 20mm | no cracking ai 20mm | fulfilled | BS EN433:1994 | product measured for damage after bending | |
| stubbed cigarette | method A ≥ rating 3 | fulfilled | BS EN433:1998 | surface changes measured after exposure to stubbed cigarettes [method A]and spontaneous burning [method B] | |
| stubbed cigarette method A, vertical load [5±0.1]N | ≤250mm3 | 199mm3 | ISO 4649:1985 | measurement of product surface abrasion | |
| Hardness | ≥75 shore A | 89 | ISO 7619:1986 | measurement of product hardness | |
| dimensional stability | Tolerance allowed: ±0.4% | -0.02% | BS EN 434:1994 | dimensional changes measured after exposing the product to heat | |
| General properties | Chemical resistance | fulfilled | BS EN423 | External changes were measured after exposing samples to chemical for determining amounts of time and then washing | |
| slip resistance ramp test | R9 | DIN51130:1992 | slip resistance measured by directly walking on differently sloping ramps | ||
| General properties | Smoke density | ≤ds450 | fulfilled | ASTM e662 | the density of smoke resulting from the burning of the product measured |
| surface flammability | ≥0.45w/cm2 | ASTM e648 | radiant heat value required for ignition of the product measured to gauge surface flammability properties |
A: We are a manufacturer, but a trading company sells the goods
A: The product you see now is cut from our finished product, so you can know the quality of our production when you see the sample.
A: For existing samples: free on charge when no more than 1 square meter. Express time will be 3 days. But you have to pay the freight.
A: 200SQM.
A: 5-10 days.
A: In a way, yes, we can get our factories reschedule their production, as long as the lead time of our other customers are not affected.
A: 30% in advance, the other 70% before shipment.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.